ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Infrared LED Board (B)

από WAVESHARE
Light-sensing Infrared LED Board, Wide Field of View. Συνδεσμολογία Connect the Infrared LED Board to the camera PCB by screws The...
31-00010670
Ογκομετρικό βάρος: 0.01kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: WAVESHARE
Part Number: 10670
Χώρα Προέλευσης: Κίνα
Πληροφορίες: Αξεσουάρ
Εξαντλημένο
Το προϊόν δεν είναι διαθέσιμο
Χωρίς απόθεμα στο φυσικό κατάστημα
4.90
Χωρίς ΦΠΑ 3.95

Συναινώ ώστε η εταιρεία (GRobotronics) να προσθέσει την διεύθυνση ηλεκτρονικού μου ταχυδρομείου στην λίστα ώστε να λάβω ενημέρωση όταν το προϊόν θα είναι ξανά διαθέσιμο. Μόλις το προϊόν γίνει ξανά διαθέσιμο θα λάβω αυτόματα ενημέρωση στο email αυτό και αμέσως θα αφαιρεθεί από την συγκεκριμένη λίστα.

Το email σου θα χρησιμοποιηθεί αποκλειστικά για τον σκοπό αυτό και καμία άλλη ενημέρωση δεν θα λάβεις. Θα είναι ορατό μόνο από συγκεκριμένους εξουσιοδοτημένους υπαλλήλους της εταιρείας.

Έχετε το δικαίωμα σε περίπτωση κατά την οποία θεωρείτε ότι η επεξεργασία που γίνεται δεν είναι σύμφωνη με τα ανωτέρω να αναζητείτε την προστασία της Αρχής Προσωπικών Δεδομένων και να ζητήσεις να διαγράψουμε ή να μεταβάλλουμε τα δεδομένα σου. Είμαστε υποχρεωμένοι σύμφωνα με τον κανονισμό της ΕΕ για την Προστασία των Γενικών Προσωπικών Δεδομένων να σε ενημερώσουμε για αυτό το δικαίωμα. Έχετε την δυνατότητα να επικοινωνείτε όποτε επιθυμείτε με την εταιρεία ώστε να ενημερωνόσαστε σχετικά με τα προσωπικά σας δεδομένα στο email [email protected]

ΑΓΑΠΗΜΕΝΑ ΣΥΓΚΡΙΣΗ

ΠΕΡΙΓΡΑΦΗ

Light-sensing Infrared LED Board, Wide Field of View.

Συνδεσμολογία

  1. Connect the Infrared LED Board to the camera PCB by screws
    • The screw holes are used for both attachment and power supply
  2. Adjust the adjustable resistor to set a proper ambient light threshold, which toggles the infrared LED automatically
    • When ambient light is lower than threshold value, the infrared LED is on, vice versa

 

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

  • Infrared LED Board(B) ×1 (Only 1 LED is included, it's recommended to buy 2 pieces when using with Raspberry Pi cameras, both the left and right sides)
  • Screws ×2

ΣΗΜΕΙΩΣΕΙΣ

  • Limited by the Raspberry Pi power supply, the 3W high-power infrared LED might cause the Pi to increase heating, heat sinks are suggested.
  • Ideal imaging distance is within 3m. When the distance goes up to 6m, the night vision camera can just capture blurry outlines.
  • It's recommended to buy 2 pieces when using with Raspberry Pi cameras, both the left and right sides.

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
WAVESHARE
Part Number:
10670
Μικτό Βάρος:
0.007kg
Χώρα Προέλευσης:
Κίνα
Πληροφορίες:
Αξεσουάρ

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • 3W high-power 850 infrared LED
  • Onboard photoresistor, the ambient light detector
  • Onboard adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED
  • Allows adding night vision function to cameras which feature embedded infrared filter :
    • 100 degree field of view, two pieces of LED is required to get wider field of view
    • Supported devices : RPi Camera (E), RPi Camera (F), RPi Camera (H)