Αρχική Σελίδα/Ρομποτική/BBC micro:bit/Micro:bit Πλακέτες & Kits/Kitronik Inventor's Kit for the BBC micro:bit

Kitronik Inventor's Kit for the BBC micro:bit

Κωδικός:

83-00005603

Part Number: KITRONIK-5603

ΚατασκευαστήςKitronik Part NumberKITRONIK-5603

Διαθέσιμο

Αποστολή σε 24 ώρες

€29⁹⁰

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

Get more from the BBC micro:bit with Kitronik's incredible Inventor's kit! The simple way to learn about creating circuits and code.

The Kitronik Inventor's Kit for the BBC micro:bit is a great way to get started with programming and hardware interaction with the BBC micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs and capacitors.

To get you off to a flying start, we have included an easy to follow tutorial book which guides you through everything you will need to know about programming the BBC micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. You'll be programming and creating circuits in no time!

The Kitronik Inventor's Kit for the BBC micro:bit provides a fantastic way of learning how to construct and control electronic circuits. The BBC micro:bit has a selection of pins that are located on the bottom edge of its PCB (see datasheet below for details). By using our specially designed Edge Connector Board for the BBC micro:bit in conjunction with the breadboard (see below), it is easy to use these pins to connect additional components to the BBC micro:bit.

ΣΗΜΕΙΩΣΕΙΣ

BBC micro:bit is NOT included. You can buy the Kitronik Inventor's Kit with the BBC micro:bit already included here.
This kit requires assembly.
No soldering is required and you can build your first circuit in minutes!
Requires:
- 1x BBC micro:bit
- 1x Phillips Screwdriver
- 1x Terminal Block Screwdriver
- 1x Micro USB Cable
Available as a 20pk classroom pack, you can get the 20pk here.

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

1x Perspex Mounting Plate
1x Potentiometer & Finger Adjust Spindle
2x Plastic Spacer 10mm
1x Sticky Fixer for Battery Pack
1x Small Prototype Breadboard
1x Terminal Connector
4x Push Switch
1x Motor
1x Transistor
2x Red 5mm LED
2x Orange 5mm LED
2x Yellow 5mm LED
2x Green 5mm LED
1x RGB 5mm LED
1x Fan Blade
5x 2.2KΩ Resistor
5x 10KΩ Resistor
5x 47Ω Resistor
1x Edge Connector Breakout Board for BBC micro:bit
1x Miniature LDR
10x Male to Male Jumper Wires
10x Male to Female Jumper Wires
4x Self-adhesive Rubber Feet
1x 470uF Electrolytic Capacitor
1x Piezo Element Buzzer
4x Pan Head M3 Machine Screw

No soldering required - build your first circuit in minutes!
Make 10 experiments included in the provided step-by-step tutorial book.
All parts are included to conduct the 10 experiments (listed below).

Breaks out 21 accessible pins from the BBC micro:bit using the Edge Connector Board for the BBC micro:bit (included).
Small Prototype Breadboard included for fast prototyping.

All of the experiments included in this booklet (listed below) are based on the Microsoft BlockEditor and Microsoft TouchDevelop editor software. We have also produced a MicroPython code example for each of the experiments and Video resources featuring a walk-through and hints and tips to help you complete the experiments.

Inventors Kit Addtional Free Resources: