Αρχική Σελίδα/Μηχανολογικά/Build Parts/DIY Kits/Linear Actuator Bundle 250mm Black with NEMA23 Motor (Assembled)

C-Beam Linear Actuator Bundle 250mm Black

Linear Actuator Bundle 250mm Black with NEMA23 Motor (Assembled)

Κωδικός:

14-00012907

ΚατασκευαστήςOem

Διαθέσιμο

Αποστολή σε 24 ώρες

€79⁹⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€63.92

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

The C-Beam Actuator Kit is an actuator driven by lead screw.

The kit is an easy way to get all the pieces needed for the build.

This C-Beam Linear Actuator will provide you with access to utilize the power of beams in your Builds!

This kit combines the unique C-Beam linear rail with the C-Beam end mounts and gantry plate, plus other v-slot components, to make a simple linear actuator. This linear actuator can be used on a CNC machine, 3D printer, or even as a compact camera slider.

C-Beam has added strength through a C-Shape profile, and utilise the V-Slot system on all sides. This allows you to use V-Slot and C-Beam hand in hand on the same machine.

In this linear actuator kit, an Lead screw system is used, driven by a NEMA23 stepper motor. This combination gives you a lot of power and precise movements.

The linear actuator is available in standard lengths of 250mm / 500mm.

The length of the linear actuator is not the travel distance. The travel distance is calculated by subtracting 100mm from the length. The standard lengths above will have travel distances of 150mm / 400mm.

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

4x Low Profile Screws M5 – 25mm
10x Low Profile Screws M5 - 20mm
2x Low Profile Screws M5 - 55mm
2x Aluminum Spacers - 6mm
2x Aluminum Spacers - 40mm
1x 1/4" x 8mm Flexible Coupling
2x Aluminum Spacers - 3mm
2x Eccentric Spacer - 6mm
2x Ball Bearing 688Z 8x16x5
2x 8mm Shim
2x Lock Collar - 8mm
4x Xtreme Mini V Wheel Kit
2x C-Beam End Mount
1x C-Beam Gantry Plate
1x Anti-Backlash Nut Block
1x C-Beam Linear Rail - 250mm
1x 8mm Metric Acme Lead Screw - 250mm
1x Stepper Motor NEMA23

Actuator Specs:
- Travel for the 250mm version is 150mm
C-Beam Specs:
- Material: Aluminium 6063 T5
- Coating: Black Anodized
- Pre-Tapped 4 Holes Ready to Accept C-Beam End Mounts
- Color: Black

Stepper Motor Specs:
- Step Angle(degrees): 1.8
- 2-Phase
- Voltage: 12V
- Rated Current: 2A/Phase
- Drive Shaft Diameter: 6.35mm
- Holding Torque: 1.29 N.M
- Form factor: NEMA 23
- Wire Leads: 4 wires