FREE SHIPPING for orders over 85.00

Magigoo Pro PA - The 3D printing adhesive

by MAGIGOO
MAGIGOO is an easy to use 3D printing adhesive designed to address ‘the first layer not sticking problem’, the most common problem found in Fused Filament Fabrication (FFF) 3D Printing.
26-00023784
Gross Weight: 0.09kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: MAGIGOO
Part Number: MPA2019
Made in: EU
Upon order
Delivery on 7 - 14 Days
No stock in retail store
23.50
Without VAT 18.95
+
WISHLIST COMPARE

DESCRIPTION

Magigoo PA is designed for professional use, to work exclusively with Polyamide filaments (Nylon). The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.

PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry there are 3 main types of PA which include PA12, PA66 and PA6.

Sometimes these materials can be either grafted with other polymers or else reinforced with glass or carbon fibers. Generally nylons exhibit high strength, toughness, elasticity, wear resistance, chemical resistance and thermal resistance and are widely sought in various industrial applications.

Nylon filaments prove to be challenging materials for FDM printing due to their loweradhesion to conventional 3D-printing build surfaces and their higher tendency to warp.Furthermore there are several classes of PA filaments each behaving differently.

MAGIGOO-PA is a specialized solution for FDM printing of PA filaments which wasdeveloped to work with a wide number of PA types

Usage

MAGIGOO PA has been designed and tested to work with different flexible filament brands.

  • Shake the bottle.
  • Apply to the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.
  • Print according to the filament/printer manufacturers recommendations
  • Allow to cool and Remove. The print should pop right off
  • Clean - Use a damp cloth to wipe off.

 

NOTES

  • Using this product with other than Nylon type filaments might cause over adhesion and damage your build surface.
  • Tips:
    • For larger prints a 20 mm brim is recommended
    • In cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier.

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
MAGIGOO
Part Number:
MPA2019
Gross Weight:
0.09kg
Made in:
EU
3D Printer Consumables:
Build Surface/Bed Adhesion