Metal Pushbutton - Momentary (16mm, Blue)

05-01610122
GQ16F-10E/J/B/12V/S
ΚατασκευαστήςONPOW Part NumberGQ16F-10E/J/B/12V/S
Προπαραγγελία
620
Gropbotronics Store Availability
Διαθεσιμότητα Καταστημάτων
Πληρωμή & Μεταφορικά

These chrome-plated metal buttons are rugged and waterproof and look real good while doing it! Simply drill a 16mm hole into any material up to 10mm thick and you can fit these in place, there's even a rubber gasket to keep any water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a blue plastic LED ring. On the back there are 2 contacts for the button (common, normal-open) and 2 for the red LED ring (+ and -). Connect 3 to 12V to the LED to have it light up nicely, there's a built in resistor!

This button is a momentary push button, when you press it the 'normal-open' contact shorts to the common contact. When you release it, the contacts open up again.

The switch and LED are separated, so you could wire it to turn on when pressed or vice versa or whatever you wish!

  • Switch type vandal resistant  
  • Stable positions number: 1-position
  • Contacts configuration: SPST-NO
  • DC contacts rating  (at resistance load): 2 A / 36 VDC
  • Sealing: IP65
  • Switching method: OFF-(ON)
  • Backlight colour: Blue
  • Leads for soldering
  • Operating temperature: -20...55°C
  • Electrical life: 200000cycles
  • Max. contact resistance: 50mΩ
  • Switching torque: 4N
  • Mechanical durability: 1000000cycles
  • Illumination: LED 12V AC/DC, ring light
  • Body colour: Silver
  • Button shape: Convex
  • Body material: Stainless steel
  • Test voltage: 2kV
  • Contact material: Silver alloy
Κατασκευαστής
ONPOW
Μικτό Βάρος
0.001kg
Διαμόρφωση Επαφών
  • SPST-NO
Μέθοδος Εναλλαγής
OFF-(ON)
DC or AC Rating
2A / 36VDC
Επαφές για
Soldering
Βρες Παρόμοια