ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

MK8 Premium Hardened Steel Nozzle 0.4mm

από BIQU
The premium nozzles from BIQU are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality...
59-00018834
Ογκομετρικό βάρος: 0.01kg
Κατασκευαστής: BIQU
Part Number: WPZ000351
Χώρα Προέλευσης: Κίνα
Διαθέσιμο
Αποστολή σε 24 ώρες
Χωρίς απόθεμα στο φυσικό κατάστημα
9.90
Χωρίς ΦΠΑ 7.98
+

ΠΕΡΙΓΡΑΦΗ

The premium nozzles from BIQU are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

All nozzles from BIQU are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.

For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a BIQU nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.

The process of making a BIQU nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.

After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.

The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01mm.

The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.

The series of nozzles from BIQU is the perfect choice for people who only wants the best and at a great value!

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Συμβατότητα Εκτυπωτή:
  • CR-10
  • CR-10 Mini
  • CR-10S
  • CR-10S4
  • CR-10S5
  • CR-20 Pro
  • Ender Series
Αναλώσιμα Υλικά 3D Εκτυπωτή:
Nozzle
Συμβατότητα Extruder:
  • CR10 (MK8 Hotend)
  • MK8

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Dimensions: 13 x 8mm
  • Material: A2 Harden Steel
  • Weight: 2gr
  • Diameter: 0.4mm
  • Diameter tolerance: ±0.01mm
  • Thread outer diameter: 6mm

ΔΥΝΑΤΟΤΗΤΕΣ