FREE SHIPPING for orders over 85.00

PrimaCreator Value Water Washable UV Resin - 500ml - Black

When you want astonishing results for less cost than many other brands - PrimaCreator VALUE resin should be your first choice! The new   water...
26-00025307
Gross Weight: 0.7kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: PRIMACREATOR
Part Number: PV-Resin-B405-0500-BK
Made in: EU
In Stock
Ships in 24 Hours
Low stock in store
29.90
Without VAT 24.11
+
Our quantity discounts:
Quantity 4+
Price 28.41
WISHLIST COMPARE

DESCRIPTION

When you want astonishing results for less cost than many other brands - PrimaCreator VALUE resin should be your first choice!

The new water washable resin from PrimaCreator is the latest addition in the range and offers the same quality as our other resins. In contrast to most other resin the water washable resin from PrimaCreator doesn’t require any chemicals for removing uncured material from the print. You just simply rinse it in regular tap water, and it comes out clean and ready to be cured. This, of course, is the best choice for both you and the environment.

Resin from our VALUE line is a high-quality resin made from the best materials. Your prints cures in sunlight or a UV curing chamber. When the curing is finished, the result is a rock-hard print with very small shrinkage. The finished print is a solid color part with a beautiful semi matte surface with excellent details and smooth layer transitions. If you go for the transparent resin you will have a crystal-clear transparency which is truly stunning.

  • VALUE resin has many benefits over other brands of comparable resins. The most noticeable is that it doesn’t smell very much.
  • VALUE resin is developed to perform well on low powered DLP machines such as the Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire and other printers that uses UV light for curing.

Material properties of this VALUE resin:

  • Optimized for UV Lightsource 395 – 405 nm
  • Fast curing time, 4 – 8 seconds per layer for quicker prints.
  • After printing clean you print in regular water or PrimaCreator Resin Cleaner.
  • When it´s time for curing you can use sunlight or a UV curing chamber.
  • Depending on print the curing times can vary:
    • In a UV light curing chamber, it will take about 2-5 minutes.
    • In sunlight, 10-20 minutes.
    • In daylight on a cloudy day it can take up to 60 minutes.

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
PRIMACREATOR
Part Number:
PV-Resin-B405-0500-BK
Gross Weight:
0.697kg
Made in:
EU
Color:
Black
Resin Type:
Water Washable
Βottle:
500ml

EXTRA SPECS

  • Flexural modulus1.882-2.385Mpa:
  • Flexural strength40-58MPa
  • Hot deformation temp.80
  • Thermal expansion:95*E-6
  • Volume shrinkage:3.35%-4.24%
  • Linear shrinkage:1.05-1.35%
  • Tensile strength:30-52MPa
  • Tensile modulus:1.779—2.385 MPa
  • Elongation at break: 4-10%
  • Hardness(Shore D)85-88 D
  • Glass transition temp.100
  • Density1.05—1.25 g/cm3
  • Notched impact strength:41-48j/m
  • Viscosity100-350MPa·s