Home/Robotics/Raspberry Pi/Raspberry Pi Accessories/Raspberry Pi Compute Module 5 Passive Cooler

Raspberry Pi Compute Module 5 Passive Cooler

SKU:

06-00020484

Part Number: SC1752

CompanyRaspberry Pi Part NumberSC1752

In Stock

Ships in 24 Hours

€7⁴⁰

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

The Raspberry Pi Cooler for Raspberry Pi Compute Module 5 is a passive heatsink that helps Compute Module 5 dissipate heat, improving CPU performance, and protects it from mechanical damage. Thermally conductive silicone on the underside of the Cooler effectively couples it to the surface of the Compute Module 5 CPU, wireless module, and power management chip for optimal heat dissipation.

Technical data

Form factor: 56mm × 41mm × 12.7mm
Product material: Aluminium profile, thermally conductive silicone

Package contents

Raspberry Pi Compute Module 5 Passive Cooler ×1 (Thermal silicone pre-fitted to the underside)
M2.5 Nylon washers ×4
M2.5 Screws ×4

Assembly instructions

Note: Before installing, please remove the protective white paper from the thermal silicone.

Install Compute Module 5 onto the Compute Module 5 IO Board (or other carrier board), if using.
Place four M2.5 × H1.5 or M2.5 × H3 nylon washers (supplied) between Compute Module 5 and the IO Board, around the four mounting holes.
As shown in the diagram below, place the Cooler onto Compute Module 5, align the mounting holes, insert four M2.5 × 8 screws (supplied) upwards from beneath the IO Board, and tighten.