Home/Robotics/Raspberry Pi/Raspberry Pi Boards / Kits/Raspberry Pi Zero Wireless

Raspberry Pi Zero Wireless (Pre-Soldered Header)

Raspberry Pi Zero Wireless

SKU:

06-00012998

Part Number: SC0065

Soldered Headers:

With Headers Without Headers

CompanyRaspberry Pi Part NumberSC0065

In Stock

Ships in 24 Hours

€21⁹⁰

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

View all variations as list

Column filling

Sort by Price	Sort by Availability	Sort by SKU	Sort by Soldered Headers
€19⁹⁰	In Stock + − ΑΓΟΡΑ	06-00010580	Soldered Headers: Without Headers
€21⁹⁰	In Stock + − ΑΓΟΡΑ	06-00012998	Soldered Headers: With Headers

Description
Specifications

The credit-card-sized computer has become even smaller! The Raspberry Pi Zero W is still the Pi you know and love, but at a largely reduced size of only 65mm long by 30mm wide and at a very economical price. With the addition of wireless LAN and Bluetooth, the Raspberry Pi Zero W is ideal for making embedded Internet of Things (IoT) projects. The Pi Zero W has been designed to be as flexible and compact as possible with mini connectors and an unpopulated 40-pin GPIO, allowing you to use only what your project requires.

At the heart of the Raspberry Pi Zero W is a 1GHz BCM2835 single-core processor, the same as the B+ and A+, with 512MB RAM. Quite frankly, this Pi is about four times faster that the original Raspberry Pi and is only a fraction of the cost of the current RPi3.

The setup for the Raspberry Pi Zero W is a little more complicated than on other Pis. Because of the small size, many of the connectors on the Pi Zero are not standard. For starters you will want a Mini HDMI to HDMI cable or adapter to connect to your monitor. You will also need a USB OTG cable to connect a USB device, as well as a unique CSI camera cable. No matter how you want to use your Raspberry Pi Zero W, you will need a microSD card with an operating system and a high-quality 5V power supply to power your board.

NOTES

Please be aware that your Pi Zero W WILL NOT BOOT without an SD card with a fresh image installed. SD cards that work in your Pi 2/3 or Pi Zero (non-W) are not guaranteed to work in your new Zero W!
You will require at least NOOBS 2.2.0 (27th Feb 2017) or Raspbian 2017-02-27 or newer. The instructions from the Raspberry Pi Foundation here will guide you on how to prepare a NOOBS card.