>>> Θέσεις εργασίας <<<

 
+302118004320
English (GB)
0Cart

Shields for Arduino

Proto Shield for Arduino UNO V5.0
39-00011803
Works with the Uno! This prototyping shield is the best out there (well, we think so, at least). It works with UNO, NG, Diecimila and Duemilanove Arduinos. You can use it with a Leonardo but it will not break out the hardware SPI pins (they're only on the ISP connector underneath) or the...
Shield TypePrototyping CompanyOEM G. Weight0.004 kg
€180
In Stock
+ −
GSM/GPRS Shield for Arduino SIM900
39-00011600
The Shield GPRS/GSM SIM900 is the easiest way to connect your Arduino projects to the cellular network and thus be able to send and receive text messages (SMS), voice calls and even connect to the Internet via GPRS and thus enter the world of the   Internet of things   (IoT).   The Shield...
Shield TypeCommunication, GPRS/GSM CompanyOEM G. Weight0.1 kg
€2990
In Stock
+ −
Proto Shield for Arduino UNO with Mini Breadboard
39-00011838
Uno Proto Shield gives possibility to carry your Arduino projects from breadboard and turn them into a proper circuit and also use your specially designed circuits with Arduino. You can use proto shield without soldering. By a  Mini Breadboard  you placed on middle section you can do...
FamilyArduino Classic SeriesArduino Making Shield TypePrototyping
€380
In Stock
+ −
Motor Shield for Arduino - L293D
39-00010391
L293D is a monolithic integrated, high voltage, high current, 4-channel driver,you can use DC motors and power supplies of up to 36 Volts, the L293D chip is also known as a type of H-Bridge,which is typically an electrical circuit that enables a voltage to be applied across a load in either...
Shield TypeMotor CompanyOEM G. Weight0.01 kg
€490
In Stock
+ −
Arduino Ethernet Shield Rev3 - Compatible
19-00025105
The Arduino Ethernet Shield connects your Arduino to the internet in mere minutes. Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet.
FamilyArduino Classic SeriesArduino Making Shield TypeCommunication, Ethernet
€2480
In Stock
+ −
Arduino CNC Shield V3
19-00010399
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.  It is a total of four slots, can drive four A4988 or  DRV8825   stepper motor driver, 4-axis Arduino CNC Shield v3 . Each road stepper motors only need two IO ports. In other words, six IO...
FamilyArduino Classic SeriesArduino Making Shield TypePrototyping
€360
In Stock
+ −
LCD Keypad Shield for Arduino
19-00010754
This LCD Display Shield gives you a nicely mounted 1602 LCD Display snaps right on top of your Arduino UNO. With onboard buttons for easy navigation including up, down, left, right, select and reset, using your Arduino away from a computer was never easier. Use this shield to display values read...
Shield TypeDisplay CompanyOEM G. Weight0.055 kg
€590
In Stock
+ −
Arduino Shield for 2.4" LCD
19-00014528
The TFT01 LCD module is work in 3.3V voltage level and it's not compatible with Arduino pins , so we make a shield for Arduino. Now user can directly plug the TFT01 in the shield and stand on the Arduino board.
Shield TypeDisplay CompanyOEM G. Weight0.02 kg
€600 €1200 You save: €6.00
In Stock
+ −
Screw Terminal Breakout for Arduino Nano
19-00010521
Extend your Arduino Nano with this handy assembly kit. Easily connect wires with a cross section of up to 1.5 mm². All 30 pins are supported by the terminal. The expansion module is built for Arduino Nano V3 and compatible boards. Dimensions : 36x53mm
FamilyArduino Nano SeriesArduino Making Shield TypePrototyping
€290
In Stock
+ −
Arduino Nano Expansion Adapter Board Shield
19-00010519
Arduino Nano IO Expansion Shield is specifically designed to facilitate an easy connection between Arduino Nano and many other devices.
Shield TypePrototyping CompanyOEM G. Weight0.021 kg
€350
In Stock
+ −
CNC Shield V4 Expansion Board For Arduino Nano
19-00010116
This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.  It is a total of three slots, can drive three A4988  stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very...
Shield TypePrototyping CompanyOEM G. Weight0.033 kg
€690
In Stock
+ −
Screw Terminal Breakout for Arduino Nano - Assembled
19-00010522
Extend your Arduino Nano with this handy assembly kit. Easily connect wires with a cross section of up to 1.5 mm². All 30 pins are supported by the terminal. The expansion module is built for Arduino Nano V3 and compatible boards. Dimensions : 36x53mm
Shield TypePrototyping CompanyOEM G. Weight0.019 kg
€350
In Stock
+ −
Сategories
Product filters
Shield Type
    Show all (14)
Συμβατότητα
Manufacturer (1)
    Show all (7)
Reset
Bestsellers