FREE SHIPPING for orders over 85.00

Servo Small 5kg.cm Metal Gears with Analog Feedback (Feetech FS9225M)

by FEETECH
It looks like a servo, it acts like a servo, but it's more than just a servo! We got a factory to custom-make these classic 'small' sized hobby servos...
11-00012820
Gross Weight: 0.04kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: FEETECH
Part Number: FS9225M
Made in: China
In Stock
Ships in 24 Hours
Available in store
9.90
Without VAT 7.98
+
Our quantity discounts:
Quantity 10+
Price 7.92
WISHLIST COMPARE

DESCRIPTION

It looks like a servo, it acts like a servo, but it's more than just a servo! We got a factory to custom-make these classic 'small' sized hobby servos with a twist - the feedback (potentiometer wiper) line is brought out to a fourth white wire. You can read this wire with an analog input such as those on an Arduino, to get the servo's position. That information can be used in robotics to improve stability or even allow 'recording' of servo motion.

This is the small size Metal Gear Digital Servo. This solid consumer grade servo is continuous rotation and able to take in 6 volts and deliver 5kg.cm.

This is a simple servo for any project with accuracy in motion!

This high quality servo is perfect for your mechatronic needs and if you are looking to get into robotics, this is where to start.

The FS9225M servo comes standard with a 4-pin power and control cable (red=power, black=ground, white=data and yellow=feedback) and all hardware listed below.

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
FEETECH
Part Number:
FS9225M
Gross Weight:
0.038kg
Made in:
China
Servo Standar
:
25T (Futaba/Feetech)
Gear Type:
Metal
Rotation:
270°
Servo Operation:
Digital
Servo Size
:
Small
Speed (6V):
0.12sec/60°
Torque (6V):
5kg.cm

EXTRA SPECS

  • Mechanical
    • Gear type: Copper Gear
    • Limit angle: No limit
    • Bearing: 2 Ball bearings
    • Horn gear spline: 25T(5.9mm)
    • Horn type: Plastic,POM
    • Case: Engineering plastic
    • Connector wire: 100mm ±5 mm(Black ,Red, Yellow and White)
    • Motor: Core motor
    • Splash water resistance: NO
    • Size: 36.2x29.2x15.2mm
    • Weight: 29g
  • Electrical (Function of the Performance)
Operating Voltage Range 4.8V 6V
Idle current(at stopped) 8mA   9mA
No load speed 0.14sec/60° 0.12sec/60°
Runnig current(at no load) 80mA 90mA
Peak stall torque 4kg.cm 5.2kg.cm
Stall current 1000mA 1200mA

FILES