+302118004320
Greek (GR)
0Στο Καλαθι

Το Πιο Ολοκληρωμένο Πακέτο με MEGA2560 (Arduino Compatible)

19-00013641
ΚατασκευαστήςOem
Διαθέσιμο
Αποστολή σε 24 ώρες
€7990
Ποσοτικές εκπτώσεις:
Ποσότητα
10+
Τιμή
€63.92
+ −
Αγαπημένα
Κάνε μια ερώτηση
Gropbotronics Store Availability
Διαθεσιμότητα Καταστημάτων
Πληρωμή & Μεταφορικά

The Mega 2560 is a microcontroller board that has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Duemilanove or Diecimila.

The Mega2 560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the in the revision 1 and revision 2 boards) programmed as a USB-to-serial converter.

Mega 2560 Project Packet listing: 

  • 25pcs LED (white,yellow,blue,red,green)
  • 1pcs RGB LED 
  • 10pcs Ceramic Capacitor(22pf & 104pf) 
  • 2pcs Photoresistor 
  • 1pcs Thermistor 
  • 5pcs Diode Rectifier (1N4007) 
  • 4pcs Electrolytic Capacitor (10UF 50V & 100UF 50V) 
  • 10pcs NPN Transistor (PN2222 & S8050)
  • 1pcs Tilt Switch 
  • 5pcs Button (small) 
  • 1pcs 1 digit 7-segment Display 
  • 1pcs 4 digit 7-segment Display 
  • 1pcs Sound Sensor Module 
  • 1pcs LCD1602 Blue Backlight with Soldering
  • 1pcs IC L293D 
  • 1pcs IC 74HC595 
  • 1pcs Active Buzzer 
  • 1pcs Passive Buzzer 
  • 1pcs RTC Module 
  • 1pcs DHT11 Temperature and Humidity Module 
  • 2pcs Potentiometer 
  • 1pcs Rotary Encoder Module 
  • 1pcs Joystick Module 
  • 1pcs Keypad Module 
  • 1pcs 5V Relay 
  • 1pcs IR Receiver Module 
  • 1pcs MEGA2560 Controller Board 
  • 1pcs Breadboard 
  • 1pcs Servo Motor (SG90) 
  • 1pcs Stepper Motor 
  • 1pcs ULN2003 Stepper Motor Driver Board
  • 1pcs Prototype Expansion 
  • 1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V
  • 1pcs HC-SR501 PIR Motion Sensor 
  • 1pcs Ultrasonic Sensor 
  • 1pcs GY-521 Module (with pin header) 
  • 1pcs 3V Servo Motor 
  • 1pcs MAX7219 Module 
  • 1pcs Remote 
  • 1pcs 9V 1A Power Supply 
  • 1pcs 65 Jumper Wire 
  • 1pcs Water Lever Sensor 
  • 1pcs USB Cable 
  • 1pcs 9V Battery with DC 
  • 1pcs RC522 RFID Module 
  • 120pcs Resistor (10R/100R/220R/330R/1K/2K/5K1/10K/100K/1M) 
  • 20pcs Female-to-male Dupont Wire
  • Microcontroller: ATmeg2560
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage (limits) 6-20V
  • Digital I/O Pins: 54 (of which 15 provide PWM output)
  • Analog Input Pins: 16
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 256 KB of which 8 KB used by bootloader
  • SRAM: 8 KB
  • EEPROM: 4 KB
  • Clock Speed: 16 MHz
Κατασκευαστής
Oem
Εγγύηση
Ως εξάρτημα, δεν καλύπτεται
Καθ. Βάρος
1.05kg
Βρες Παρόμοια
  • Προτείνουμε επίσης