ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Θερμίστορ NTC 100K με Καλώδιο 2m για 3D Εκτυπωτή

από OEM
Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature...
19-00010697
Ογκομετρικό βάρος: 0.01kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: OEM
Χώρα Προέλευσης: Κίνα
Διαθέσιμο
Αποστολή σε 24 ώρες
Διαθέσιμο στο φυσικό κατάστημα
2.90
Χωρίς ΦΠΑ 2.34
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+ 100+
Τιμή 2.32 2.03

ΠΕΡΙΓΡΑΦΗ

Upgrade from the original ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple. The temperature measurement range is increased from -50 ℃~ +250℃ to -50 ℃ ~ +350 ℃. It helps a lot to print high-temperature filament, can replace the original K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended. The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement. HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
OEM
Μικτό Βάρος:
0.013kg
Χώρα Προέλευσης:
Κίνα

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Sensor type: NTC100K
  • Material constant: B3950
  • Color: White
  • Connector: JST XH

  • Heating Block is not included

ΔΥΝΑΤΟΤΗΤΕΣ

  • Resistance package temperature measurement, the external diameter of the cylinder is 3mm and the length is 15mm. It can be used to support the heating of the thermocouple.
  • From the original range of temperature measurement -50℃ to +350℃, power assisted printing high temperature material.
  • The use of 304 stainless steel, combined with internal temperature measurement and packaging, to achieve maximum service life and accurate temperature measurement.
  • The white high temperature wire cord, higher temperature resistance, using plying line connection, not easy to break.
  • It can be used with the new heating tube (the new heating pipe can be heated up to about 350 degrees).
  • The measuring temperature can reach 350 degrees, which can effectively replace the K thermocouple. 
  • It solves the problem that the K type thermocouple has strict requirements for wiring, the line is too long, and the temperature fluctuation is too large and so on, which affects the printing quality.

ΠΡΟΤΕΙΝΟΥΜΕ ΕΠΙΣΗΣ