Αρχική Σελίδα/Εργαλεία/Εργαλεία Χειρός/Διάφορα Εργαλεία/Thread Starting Tap 6-32

Thread Starting Tap 6-32

Κωδικός:

17-99375292

Part Number: 2522A667

Part Number2522A667

Διαθέσιμο

Αποστολή σε 24 ώρες

€12⁸⁰

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

The 6-32 thread starting tap can be used for cutting new threads or to clean up damaged threads in a previously tapped hole. This tap has several tapered threads at the end to guide the tap into the hole and begin cutting threads. Recommeneded for steel, iron, stainless steel, nickel, aluminum, brass, bronze, copper and plastic. Be sure to use lubricant and occasionally back the tap out to clear out shavings during usage.

These taps are made of uncoated high-speed steel and are for use on most metals and plastics. Also known as hand taps, use them with a tap wrench. Taps for starting threads have a taper chamfer with 7-10 tapered threads at the tip to guide the tap into the hole.

Thread Size: 6-32
Thread Length: 11/16"
Overall Length: 2"
Maximum Tapping Depth: 11/16"
Drill Bit Size: 36
Drill Bit Size Decimal Equivalent: 0.1065"
Thread Direction: Right Hand
For Use On: Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Copper, Plastics
Material: Uncoated High-Speed Steel
For Tool Type: Tap Wrenches
Flute Style: Straight
Number of Flutes: 3
Thread Type: UNC
Pitch Diameter Limit: H3
Pitch Diameter Tolerance: +0.0010" to +0.0015"
Chamfer Type: Taper