FREE SHIPPING for orders over 85.00

Thread Starting Tap 6-32

The 6-32 thread starting tap can be used for cutting new threads or to clean up damaged threads in a previously tapped hole. This tap has several tapered...
17-99375292
Gross Weight: 0kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Part Number: 2522A667
Made in: USA
In Stock
Ships in 24 Hours
No stock in retail store
12.80
Without VAT 10.32
+
WISHLIST COMPARE

DESCRIPTION

The 6-32 thread starting tap can be used for cutting new threads or to clean up damaged threads in a previously tapped hole. This tap has several tapered threads at the end to guide the tap into the hole and begin cutting threads. Recommeneded for steel, iron, stainless steel, nickel, aluminum, brass, bronze, copper and plastic. Be sure to use lubricant and occasionally back the tap out to clear out shavings during usage.

SPECIFICATIONS

Type of Tool:
  • Threading Tool
Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Part Number:
2522A667
Gross Weight:
0.001kg
Made in:
USA

EXTRA SPECS

These taps are made of uncoated high-speed steel and are for use on most metals and plastics. Also known as hand taps, use them with a tap wrench. Taps for starting threads have a taper chamfer with 7-10 tapered threads at the tip to guide the tap into the hole.

  • Thread Size: 6-32
  • Thread Length: 11/16"
  • Overall Length: 2"
  • Maximum Tapping Depth: 11/16"
  • Drill Bit Size: 36
  • Drill Bit Size Decimal Equivalent: 0.1065"
  • Thread Direction: Right Hand
  • For Use On: Steel, Iron, Stainless Steel, Nickel, Aluminum, Brass, Bronze, Copper, Plastics
  • Material: Uncoated High-Speed Steel
  • For Tool Type: Tap Wrenches
  • Flute Style: Straight
  • Number of Flutes: 3
  • Thread Type: UNC
  • Pitch Diameter Limit: H3
  • Pitch Diameter Tolerance: +0.0010" to +0.0015"
  • Chamfer Type: Taper