Αρχική Σελίδα/Ρομποτική/Raspberry Pi/Raspberry Pi Πρόσθετα (HATs)/Waveshare 4G GSM/GPRS/GNSS HAT - LTE CAT4

Waveshare 4G GSM/GPRS/GNSS HAT - LTE CAT4

Κωδικός:

31-00017372

Part Number: SIM7600G-H 4G HAT

ΚατασκευαστήςWaveshare Part NumberSIM7600G-H 4G HAT

Εξαντλημένο

€94⁹⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€85.41

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

4G/3G/2G/GSM/GPRS/GNSS HAT For Raspberry Pi, Based On SIM7600G-H

The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.

You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

SIM7600G-H 4G HAT x1
LTE Antenna x1
GPS External Antenna (B) x1
USB type A plug to micro plug cable x2
RPi screws pack (2pcs) x1

ΣΗΜΕΙΩΣΕΙΣ

The Raspberry Pi in the photo is NOT included.

SIM7600G-H
CP2102 USB to UART converter
NAU8810 audio decoder
TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
MP2128DT power chip
MP1482 power chip
Raspberry Pi GPIO header: for connecting with Raspberry Pi
SIM7600 control interface: for connecting with host boards like Arduino/STM32
SIM card slot: supports 1.8V/3V SIM card
TF card slot: allows file/SMS/... storage
3.5mm earphone/mic jack
USB interface: for testing AT Commands, getting GPS positioning data, etc.
USB to UART interface: for serial debugging, or login to Raspberry Pi
MAIN antenna connector
AUX antenna connector
GNSS antenna connector
Power switch
Network status indicator
Power indicator
Operating voltage selection jumper:
VCCIO - 3.3V: set operating voltage as 3.3V
VCCIO - 5V: set operating voltage as 5V
UART selection jumper:
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART

Communications Specifications:

GNSS Specifications
- Receiver type
  - 16-channel
  - C/A code
- Sensitivity
  - Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
  - Cold starts: -148 dBm
- Time-To-First-Fix (open air)
  - Cold starts: <35s
  - Hot starts: <1s
- Accuracy
  - Position: <2.5m CEP
SMS and Audio Specifications
- SMS
  - Supported types: MT, MO, CB, Text, PDU
  - Storage: USIM card and ME (default)
- Audio feature
  - Supports echo cancellation
  - Supports noise reduction
Other Specifications
- Power supply: 5V
- Operating voltage: 5V/3.3V (configured via jumper)
- Operating temperature: -30°C ~ 80°C
- Storage temperature: -45°C ~ 90°C
- Dimension: 56.21x65.15mm

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports GPS, BeiDou, Glonass, LBS base station positioning
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Onboard CP2102 USB to UART converter, for serial debugging
Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card
TF card slot for storing data like files, messages, etc.

Onboard audio jack and audio decoder for making telephone call
2x LED indicators, easy to monitor the working status
Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baudrate: 9600bps ~ 115200bps
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)