ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Waveshare 5G Dongle Module - USB 3.1

από WAVESHARE
This 5G DONGLE with Quad Antennas, USB3.1 Port, Aluminum Alloy Heatsink and M.2 Key B Interface supports SIMCom & Quectel 5G Modules
31-00023252
Ογκομετρικό βάρος: 0.05kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: WAVESHARE
Part Number: USB TO M.2 B KEY
Διαθέσιμο
Αποστολή σε 24 ώρες
Χωρίς απόθεμα στο φυσικό κατάστημα
27.80
Χωρίς ΦΠΑ 22.42
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+
Τιμή 25.02

ΠΕΡΙΓΡΑΦΗ

5G DONGLE Module, Quad Antennas, M.2 to USB 3.1 port, Aluminum Alloy Heatsink, M.2 Key B Interface
Support SIMCom & Quectel 5G Module

Compatible With SIMCom / Quectel 5G Modules

SIM8202G-M2, SIM8262E-M2, SIM8262A-M2, RM500Q-GL, RM502Q-AE, RM520N-GL (see wiki page for more information)

Multiple Size Compatibility

Compatible With 3042 / 3052 Form Factor



Connection Examples

Supports Directly Connect Or Access Via The USB Cable To Windows PC, Raspberry Pi 4B/3B+, CM4-IO-BASE-A/B And Jetson Nano Series

USB Cable Upgrade

Upgrades To A USB3.0 Extension Cable With An Auxiliary Power Supply Port, Prevent The Power Insufficient Issue Of The USB Port When 5G Module Power Consumption Is Too High, Which May Affect The Networking And Speed Measurement Effect Of The Module


Multi System Support, Easy To Use

Supports Windows/Linux

Just plug it into USB port, go through some simple configuration, the high speed 5G network connection will be ready to use

Aluminum Alloy Heatsink

Effective Heat Dissipation For 5G Module, Protect Your HAT At The Same Time

 

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
WAVESHARE
Part Number:
USB TO M.2 B KEY
Μικτό Βάρος:
0.05kg

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Outline Dimensions

In the Box

  1. USB TO M.2 B KEY x 1
  2. Aluminum Alloy case (top and bottom) x 1
  3. Antenna x 4
  4. IPEX adapter cable x 4
  5. USB3.0 female to dual USB male extension cable x 1
  6. SMA Protective Cap x 4
  7. Thermal tape x 1
  8. Screws pack x 1

ΔΥΝΑΤΟΤΗΤΕΣ

  • Support 5G modules with M.2 (NGFF) Key B interface, compatible with SIMCom and Quectel 5G modules
  • Support 5G modules with 3042/3052 form factor, such as SIM82XX, and RM50XQ series 5G modules
  • USB 3.1 Type A port for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G network
  • 4x SMA antenna connectors, easy to install the antenna
  • Onboard SIM card slot for NANO SIM card
  • Onboard power and network indicators, with multiple reserved pads, for checking module operating status and testing other functions
  • PCB ENIG process, reserved multi slots and positioning holes for integration
  • Comes with customized aluminum alloy heatsink, good heat dissipation, nice-looking, protective and durable

SOFTWARE FUNCTIONS

  • Operating systems Windows/Linux/Android
  • Communication protocols TCP / UDP / FTP / HTTP / HTTPS / PING / SMS
  • Dial Up RNDIS, NDIS, PPP, MBIM
  • Firmware upgrade Supports firmware upgrade via USB port

HARDWARE SPECIFICATIONS

  • SIM Card 1.8V/2.95V
  • Antenna For 3G/4G/5G/GNSS, 4 × IPEX-4 connectors
  • Power Supply 3.135~4.4V
  • Form Factor M.2
  • Weight: 0.157 kg

ΑΡΧΕΙΑ