Σημαντική ενημέρωση: Προτείνουμε αλλαγή κωδικού για την ασφάλειά σας (οι κωδικοί χρησιμοποιούν πολύ ασφαλή μέθοδο κρυπτογράφησης)

Στις 22/5 σημειώθηκε μη εξουσιοδοτημένη πρόσβαση στο κατάστημά μας. Μάθετε περισσότερα εδώ.

Αρχική Σελίδα/Ρομποτική/Επικοινωνία/GPS/GSM/GPRS/3G/Waveshare 5G Dongle Module - USB 3.1

Waveshare 5G Dongle Module - USB 3.1

Κωδικός:

31-00023252

Part Number: USB TO M.2 B KEY

ΚατασκευαστήςWaveshare Part NumberUSB TO M.2 B KEY

Κατόπιν παραγγελίας

Διαθέσιμο σε 45-60 ημέρες

€27⁸⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€25.02

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

5G DONGLE Module, Quad Antennas, M.2 to USB 3.1 port, Aluminum Alloy Heatsink, M.2 Key B Interface
Support SIMCom & Quectel 5G Module

(Note: the 5G module is NOT included in the USB TO M.2 B KEY kit and needs be purchased separately.)

Compatible With SIMCom / Quectel 5G Modules

SIM8202G-M2, SIM8262E-M2, SIM8262A-M2, RM500Q-GL, RM502Q-AE, RM520N-GL (see wiki page for more information)

Multiple Size Compatibility

Compatible With 3042 / 3052 Form Factor

Connection Examples

Supports Directly Connect Or Access Via The USB Cable To Windows PC, Raspberry Pi 4B/3B+, CM4-IO-BASE-A/B And Jetson Nano Series

USB Cable Upgrade

Upgrades To A USB3.0 Extension Cable With An Auxiliary Power Supply Port, Prevent The Power Insufficient Issue Of The USB Port When 5G Module Power Consumption Is Too High, Which May Affect The Networking And Speed Measurement Effect Of The Module

Multi System Support, Easy To Use

Supports Windows/Linux

Just plug it into USB port, go through some simple configuration, the high speed 5G network connection will be ready to use

Aluminum Alloy Heatsink

Effective Heat Dissipation For 5G Module, Protect Your HAT At The Same Time

Outline Dimensions

In the Box

USB TO M.2 B KEY x 1
Aluminum Alloy case (top and bottom) x 1
Antenna x 4
IPEX adapter cable x 4
USB3.0 female to dual USB male extension cable x 1
SMA Protective Cap x 4
Thermal tape x 1
Screws pack x 1

Support 5G modules with M.2 (NGFF) Key B interface, compatible with SIMCom and Quectel 5G modules
Support 5G modules with 3042/3052 form factor, such as SIM82XX, and RM50XQ series 5G modules
USB 3.1 Type A port for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G network
4x SMA antenna connectors, easy to install the antenna
Onboard SIM card slot for NANO SIM card
Onboard power and network indicators, with multiple reserved pads, for checking module operating status and testing other functions
PCB ENIG process, reserved multi slots and positioning holes for integration
Comes with customized aluminum alloy heatsink, good heat dissipation, nice-looking, protective and durable

SOFTWARE FUNCTIONS