+302118004320
English (GB)
0Cart

Adafruit Analog Temperature Sensor Plug-and-Play STEMMA - TMP235

09-00004686
ADA4686
CompanyAdafruit Part NumberADA4686
In Stock
Ships in 24 Hours
€340
Adafruit
+ −
Add to wish list
Ask a question
Gropbotronics Store Availability
Availability in Retail Store
Payments & Shipping

For fans of the TMP36, we now have a very similar analog temperature sensor with a 3-pin JST connector (we call these STEMMA connectors). Unlike many of our temperature sensors, this one is analog output, not I2C, so its best used by a microcontroller with an analog input, as most microcontrollers do.

These sensors are very simple to use, no libraries or complex configurations required. Plug this board into any of our 3-pin JST PH cables (we have ones with header ends, alligator clips, etc) Red goes to 3V to 5V DC power, black wire connects to ground, and white wire connects to an analog input. The voltage out is 0V at -50°C and 1.75V at 125°C. You can easily calculate the temperature from the voltage in millivolts: Temp °C = 100*(reading in V) - 50

Like with the TMP36, you'll get the best readings out of an Arduino UNO or compatible if you set the analog reference voltage to external, then connect AREF to 3.3V for a stable analog reference.

 

NOTES

  • JST PH 3-pin cable is not included

  • Dimensions: 25.5x17.7x7.2mm
  • Weight: 2.0g
Warranty
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company
Adafruit
G. Weight
0.001kg
Sensor Type
  • Temperature
Typical Input Voltage
  • 3VDC
  • 5VDC
Interface
  • Analog
Communication Protocol
  • Without
Find similar
  • We suggest also