Home/Robotics/Arduino/Shields for Arduino/Arduino Mega Proto Shield Rev3

Arduino Mega Proto Shield Rev3

SKU:

02-00010312

Part Number: A000080

CompanyArduino Part NumberA000080

In Stock

Ships in 24 Hours

€6⁸⁰

Our quantity discounts:

Quantity

10+

Price

€6.46

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

The Arduino Prototyping Shield makes it easy for you to design custom circuits. You can solder parts to the prototyping area to create your project,or use it with a small solderless breadboard (not included) to quickly test circuit ideas without having to solder. It's got extra connections for all of the Arduino MEGA I/O pins, and it's got space to mount through-hole and surface mount integrated circuits. It's a convenient way to make your custom Arduino circuit into a single module.

Board features as follows:

1.0 Arduino pinout
1 Reset button
1 ICSP connector
14 pins SMD footprint (50 mils pitch)
32 double row through Hole pads, standard Arduino breakout layout
Proto aerea with multiple THT pads, 100 mils pitch

Power

The Proto Shield bring the power from the Arduino standard 5V and GND pins to the two power bus rows placed between the Through Hole package footprint, which can be used for powering the DIP sockets, or for power and ground rows.

Physical Characteristics

The maximum length and width of the Proto Shield PCB are 2.7 and 2.1 inches respectively. Three screw holes allow the shield to be attached to a surface or case.

Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.

SPI Connection

On the ICSP connector only 5V, GND and RST are wired to the respective pins on the header. MOSI and MISO are present only on the connector pads.