Home/Robotics/Breakout Boards/Power Modules/DC-DC Automatic Step Up-Down Power Module - 5V 600mA

DC-DC Automatic Step Up-Down Power Module - 5V 600mA

SKU:

25-00016908

Part Number: DFR0569

CompanyDFRobot Part NumberDFR0569

In Stock

Ships in 24 Hours

€4⁸⁰

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

This power module contains the function of automatic buck-boost and integrates with the related circuit of buck-boost converter. Its size is just as same as a dime, which is very easy for embedding.
Input voltage range 3~15V, fixed output voltage 5V, the maximum load current is 0.6A and its quiescent current is as low as 200uA. In theory, the work frequency of the module can reach to 1.2MHz. Besides, it has steady output voltage, which can work long time without voltage shift. The maximum conversion can reach to 85%. So it is suitable for the occasions with high requirements. You can use this power module to DIY mobile power pack and provide constant power for your projects.

Applications

Power supply for controller main-board, DIY current source, floodlight, DIY toy car, communication device, digital radio.

Input Voltage: 3～15Vdc
Output Voltage: 5V
Output Accuracy: ±0.1V
The Maximum Output Peak Current: 600mA
Full-Load Output Ripple: Vpp<50mV
No-Load Current: IQ 180uA
Switch-Off Function: Not Support
Operating Temperature: -10℃ ~ +50℃
Operating Humidity: 20% ~ 90% relative humidity, no condensation
Storage Temperature: -40℃ ~ +125℃
Installation Method: Chip-mounting
With or Without Isolation: Without Isolation
Service Life: 50000h
Dimension: 17×13mm / 0.67×0.51inch

NOTES

The input voltage must within 15V.
Load current should not be in 600mA or above for a long time, otherwise it will affect the service life of the module and even burn out.
If the load current is relatively high, you should increase the minimum input voltage to ensure normal operation.