FREE SHIPPING for orders over 85.00

DC-DC Converter Step-Down 1.25-32V 5A with LED Display - XL4015

by OEM
This product is a 180 kHz fixed frequency PWM buck (step-down) DC/DC module, capable of driving a 5A load with high efficiency, low ripple, and excellent...
39-00011854
Gross Weight: 0.05kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: OEM
Part Number: XL4015
Made in: China
In Stock
Ships in 24 Hours
Low stock in store
8.90
Without VAT 7.18
+
Our quantity discounts:
Quantity 10+
Price 7.12
WISHLIST COMPARE

DESCRIPTION

This product is a 180 kHz fixed frequency PWM buck (step-down) DC/DC module, capable of driving a 5A load with high efficiency, low ripple, and excellent line and load regulation. The module with a voltage meter to display the input voltage and output voltage, and the voltage can be corrected through the button to improve the accuracy of the voltmeter.

Voltmeter calibration method:

  1. Output voltage calibration steps
    • Step 1: Adjust the right button so that the OUT LED lighted, the voltmeter shows the value of output voltage; Press the right button for more than 2 seconds, release, voltmeter and OUT LED flashes in synchronization so that you enter the output voltage calibration mode.
    • Step 2: Press the right button (normal speed), the voltage value is adding up a unit; Press the left button, minus a unit; Due to a unit is less than 0.1V, the minimum voltage display to 0.1V, so you need to continuously press 1-5 times to see the voltmeter change 0.1V, how many times voltmeter change 0.1V by pressing the key, depending on the current display voltage, the higher the voltage, the fewer the number of press.
    • Step 3: press the right button for more than 2 seconds, release, to exit the output voltage calibration mode. All parameters set to automatically power down to save.
  2. Input voltage calibration steps
    • Step 1: adjust the right button so that the IN LED lighted, the voltmeter shows the value of input voltage; press the right button for more than 2 seconds, release, voltmeter and IN LED flashes in synchronization so that you enter the input voltage calibration mode.
    • Steps 2 and 3, consistent with the output voltage calibration method.

 

NOTES

  • When you use the product, the module inputs and outputs to be isolated from ground.
  • USB output voltage is consistent with the module, not a fixed 5V output. When charging for digital equipment, make sure USB output voltage is 5V.
  • When you encounter this problem the module can not adjust the output voltage is always equal to the input voltage, please counterclockwise rotation of the “voltage potentiometer” 10 laps or more, then use the module you can adjust the output voltage. Because the factory default output voltage of about 20V.

SPECIFICATIONS

Type of Modules:
  • Step-Down
Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
OEM
Part Number:
XL4015
Input Voltage:
5-36Volt
Output Voltage:
1.25-32Volt
Output Current:
5Amp
Gross Weight:
0.05kg
Made in:
China

EXTRA SPECS

  • Input voltage range: 5-36V DC
  • Output voltage range: 1.25-32V DC adjustable
  • Output current: max 5A
  • Output power: 75W
  • High efficiency up to 96%
  • Voltmeter error: 0.05V
  • Dimensions: 68x38x10mm
  • Power indicator: Yes
  • Short circuit protection: Yes (limit current 8A)
  • Over-temperature protection: Yes (shutdown output automatically after over temperature)
  • Input Reverse Polarity Protection: None (cascade high current diode if required)
  • Wiring: IN+/- Input, OUT+/- Output
  • Built-in current limit function