Home/3D Printing/Filament/FLEX (TPU,TPC,TPE)/eSUN eFlex TPU-87A -1.75mm 1kg – Natural

eSUN eFlex TPU-87A -1.75mm 1kg – Natural

SKU:

16-00017589

Part Number: eFlex-P175N1

CompanyeSUN Part NumbereFlex-P175N1

In Stock

Ships in 24 Hours

€39⁹⁰

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

This flexible filament is softer than TPU-95A, but harder than the eLastic range. The printed products have a certain degree of transparency and are strong and durable. The hardness of 87A is perfect for applications such as Shoes, Conveying pipelines, elastic products etc. The material can be stretched many times over before it breaks and is extremely flexible and tough

Filament Properties Table

Density(g/cm3)	1.12
Tensile Strength(MPa)	52
Elongation at Break(%)	500
Durability	9/10
Printability	6/10
Recommended printing parameters
Extruder Temperature(℃)	220 – 250℃
Recommended temperature	240℃
Bed temperature(℃)	45 – 60°C
Fan Speed	100%
Printing Speed	20 – 50mm/s
Heated Bed	Optional
Recommended Build Surfaces	Masking paper, PVP solid glue, PEI
Print recommendations	Drying at 55℃/>4h, short-range extruder, slow printing

Notes

It is recommended to dry (55℃/>4H) before printing to achieve the best printing effect. It is recommended to use it with eBOX cartridges when printing.
It is recommended to use a short-range two-wheel reduction extruder designed for flexibility, and eFlex materials cannot be printed with a remote extruder.
The nozzle may have impurities after printing for a long time. It is recommended to use it with the cleaning filament. If necessary, replace the nozzle and throat with a new one.