Αρχική Σελίδα/Ηλεκτρονικά/Ποτενσιόμετρα/Ποτενσιόμετρα/Gravity Analog Rotation Potentiometer Sensor - Rotation 300°

Gravity Analog Rotation Potentiometer Sensor - Rotation 300°

Κωδικός:

25-00016167

Part Number: DFR0054

ΚατασκευαστήςDFRobot Part NumberDFR0054

Διαθέσιμο

Αποστολή σε 24 ώρες

€3⁶⁰

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

This is an Arduino rotation potentiometer , it is able to rotate up to 300-degree. With the Arduino IO expansion board, in combination, it can be very easy to achieve position-dependent interaction with the rotating effect or produce MIDI instrument. So with this sensor, you can learn how rotary potentiometer works and what analog signal is. You can have much fun with this basic input device.

Gravity Interface is adapted to allow plug&play. The IO Sensor Expansion Shield is the best match for this sound senor connecting to your Arduino. As this sensor can work at 3.3V which make it compatible with Raspberry Pi, intel edison, joule, and curie.

What is potentiometer?

"A potentiometer is an instrument for measuring the potential (voltage) in a circuit. A fraction of a known voltage from a resistive slide wire is compared with an unknown voltage by means of a galvanometer. The sliding contact or wiper of the potentiometer is adjusted and the galvanometer briefly connected between the sliding contact and the unknown voltage. The deflection of the galvanometer is observed and the sliding tap adjusted until the galvanometer no longer deflects from zero. At that point the galvanometer draws no current from the unknown source, and the magnitude of voltage can be calculated from the position of the sliding contact."

Rotating this sensor can input different voltage which can change Brightness of this LED.

Supply Voltage: 3.3V to 5V
Interface type: Analog
300 degree rotation sensor
Size: 22x31mm

Wide voltage range from 3.3V to 5V
Standard assembling structure (Times-of-5mm Center distance between two 3mm mounting holes)
Easily recognitive interfaces of sensors ("A" for analog and "D" for digital)