Illuminated Push Button - Momentary (16mm, Green)

29-00011440
R16-504BD-GREEN
ΚατασκευαστήςOem Part NumberR16-504BD-GREEN
Διαθέσιμο
Αποστολή σε 24 ώρες
100
Ποσοτικές εκπτώσεις:
Ποσότητα
100+
1000+
Τιμή
0.80
0.60
Gropbotronics Store Availability
Διαθεσιμότητα Καταστημάτων
Πληρωμή & Μεταφορικά
A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good.

The body is a black plastic with the LED built inside. There are two contacts for the button and two contacts for the LED, one marked + and one -. The forward voltage of the LED is about 2.2V so connect a 220 to 1000 ohm resistor in series just as you would with any other LED to your 3V or higher power supply.

This particular button has a red body and LED and is latching on/off. The two switch contacts are either connected or disconnected. When you push the button they will switch from one to the other, like an on-off switch. The LED is separated from the button, so you can make it light up when on, light up when off, always lit, etc.
  • Type of switch: Push-button
  • Number of all positions: 2
  • Stable positions number: 1-position
  • Contacts configuration: SPST-NO
  • AC contacts rating @R (at resistance load): 3 A / 250 VAC
  • Actuator colour: Green
  • Illumination: LED 2.2V DC
  • Backlight colour: Green
  • Leads for soldering
  • Switching method: OFF-(ON)
  • Operating temperature: -25...70°C
  • Mounting: On panel
  • Button shape: Round, prominent
  • Body material: Polyamide
  • Flammability rating: UL94HB
  • Terminals plating: Silver plated
Εγγύηση
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
Oem
Μικτό Βάρος
0.005kg
Διαμόρφωση Επαφών
  • SPST-NO
Μέθοδος Εναλλαγής
OFF-(ON)
DC or AC Rating
3A / 250VAC
Επαφές για
Soldering
Βρες Παρόμοια
  • Προτείνουμε επίσης