Αρχική Σελίδα/Μηχανολογικά/Κινητήρες/Servo Εξαρτήματα/Linear Actuator Kit

Linear Actuator Kit

Κωδικός:

83-00002595

Part Number: KITRONIK-2595

ΚατασκευαστήςKitronik Part NumberKITRONIK-2595

Διαθέσιμο

Αποστολή σε 24 ώρες

€8⁴⁰

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

Our new Linear Actuator converts the circular movement of a 180 degree servo (supplied) into motion in a straight line, one way and then the other. It can be mounted to a project to provide either horizontal or vertical movement.

Linear Actuators are useful for a whole host of different applications, like; robots, automated button switching, steering racks for buggies, a point switcher on a model railway, animating a diorama display, etc. Linear actuators are also used extensively in industry and in consumer products, such as; valves, cams, floppy disk drives and optical disk drives, just to name a few.

An example of a fully assembled linear actuator being used with a servo:lite board and BBC microbit.

The Linear Actuator has been cut from a 5mm clear blue Perspex Sheet, the same material as used in our servo powered Klaw gripper. There are a range of mounting holes at either end of the rack including a 3mm hole, a 3mm square, and standard servo horn holes suitable for wire (1mm dia) and it has approximately 20mm of travel. It has a gear ratio of 2:3 and the stall torque of the provided servo is 1.5kg/cm at 6V and 1.3kg at 4.8V.

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

Linear Actuator Laser Cut Parts
1x Micro 180 Degree Servo and fixings
2x M3x 10 Pozi PanSteel M/C
1x M3 Form A Steel Washer
Linear Actuator assembly Instructions

The Linear Actuator converts the circular movement of a 180 degree servo (supplied) into motion in a straight line.
It is supplied with a 180 degree FS90 servo and fixings.
Useful for a wide range of applications, such as; robotics, switching, animating displays and more.