FREE SHIPPING for orders over 85.00

Optical Endstop with Wires

by OEM
This infrared sensor is designed for use as an endstop for 3D printers but it can be used for other IR beam interrupter purposes as well. The module...
19-00020913
Gross Weight: 0kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: OEM
Made in: China
In Stock
Ships in 24 Hours
No stock in retail store
3.60
Without VAT 2.90
+
Our quantity discounts:
Quantity 10+ 100+
Price 2.88 2.52
WISHLIST COMPARE

DESCRIPTION

This infrared sensor is designed for use as an endstop for 3D printers but it can be used for other IR beam interrupter purposes as well.

The module was designed to detect travel limits for 3D printers, but they will work for many beam-break applications such for a security system or counting revolutions of a spoked wheel that passes through the uprights.

This module has an IR transmitter and receiver pair that face each other across a U-shaped housing. An object moving through the uprights breaks the IR beam.

The output is normally held LOW. When the beam is broken, the output goes HIGH and a green LED on the module illuminates.

The module uses a 3-pin 2.54mm JST style connector.  The other end of the cable terminates in the same kind of connector and is compatible with a standard 2.54mm male headers.

 

NOTES

  • That the cable is not color coded. Red does not necessarily go to Vcc, so be sure to follow the pin-out of the connector labeled on the back of the board as shown below
  • 1×3 Connector
    • VCC= 3.3 or 5V to match the MCU.
    • GND = Ground which should be common with the MCU.
    • SIG = Signal output of the module.  This pin is normally LOW.  When the IR beam is broken, the output goes HIGH (Vcc).
  • The module has 2 large mounting holes.

THE PACKAGE INCLUDES

  • Optical Endstop Module
  • 100cm cable

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
OEM
Gross Weight:
0.001kg
Made in:
China

EXTRA SPECS

  • Operating Ratings
    • Vcc Range: 3.3 – 5VDC
    • Logic high: Pulled to Vcc via transistor
    • Logic Low: Pulled to Ground
  • Dimensions
    • LxW (PCB): 35x11.5mm 
    • Height U-Channel: 12mm
    • HxW (Inside U-Channel): 8x5mm
    • Depth of intrusion into U-Channel to interrupt beam: 3.5mm
    • Cable Length: 100cm
    • Wire Gauge: 24AWG

FEATURES

  • Detects presence of an object that passes through the uprights.
  • Use as travel limit switch on 3D printers or other beam break detect applications
  • 100 cm long 24AWG cable
  • Green LED Lights when beam is broken
  • 3.3 and 5V logic compatible