+302118004320
Greek (GR)
0Στο Καλαθι

Aluminum Heatbed MK3

19-00012597
ΚατασκευαστήςOem
Διαθέσιμο
Αποστολή σε 24 ώρες
€1480
Ποσοτικές εκπτώσεις:
Ποσότητα
10+
Τιμή
€11.84
+ −
Αγαπημένα
Κάνε μια ερώτηση
Gropbotronics Store Availability
Διαθεσιμότητα Καταστημάτων
Πληρωμή & Μεταφορικά

The ALU-Heatbed MK3 have features similar to MK2 and you can also operate this board with 12V or 24V.

  • Heatbed with 3.1mm Aluminum Core. Print directly on the heatbed, no need for glass plate. It's a much lighter solution than PCB heatbed + glass, which makes it better for faster prints.
  • Dual power supply. Operate at 12V or 24V. You can use thinner wires when operating at 24V.
  • A central mounting hole on the front side to allow for three point mounting. This is much easier for bed leveling in comparison to 4 point mounting. First level the side with two holes and fix in place, then level the side with one hole.
  • Large solder pads for multiple wires (ribbon cable) or a SMD pinhead connector can be mounted.
  • 1 layer 35μm copper
  • SMD Leds presoldered for control
  • Recommended permanent heating 120°C
  • Max. Temp: 180° C
  • Heating Time: 24V reaches 100° C in 2 minutes
  • Powersupply 12V and 24V selectable by connectors
  • Power: 120W
  • Resistance: 1.4-1.6 Ohm at 12V, 5.0-5.4 Ohm at 24V
  • Based on the MK2A design of Josef Prusa
  • 5 holes 3mm for 3 or 4 point mounting
  • Material: Aluminum
  • Heating Area: 199 x 199mm
  • Color: Black
Εγγύηση
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
Oem
Μικτό Βάρος
0.386kg
Βρες Παρόμοια
  • Προτείνουμε επίσης