Raspberry Pi Pico Evaluation Kit - Type B

Raspberry Pi Pico Evaluation Kit Type B

Pico unit & Three basic expansion boards

Comes With Demo Code For GPIO, PWM, I2C, SPI...

Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing. Microcontrollers are a different type of device than Single Board Computers (like the Raspberry Pi 4 and previous generations of Pi), they don't run an operating system and they are typically programmed to do just one task - though that task can be pretty intricate and exciting! They're perfect for experimenting with hardware and using as the brains of custom devices, machines and inventions.

It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port.

RP2040

Designed by Raspberry Pi, RP2040 features a dual-core Arm Cortex-M0+ processor with 264KB internal RAM and support for up to 16MB of off-chip Flash. A wide range of flexible I/O options includes I2C, SPI, and - uniquely - Programmable I/O (PIO). These support endless possible applications for this small and affordable package.

Application Demo

THE PACKAGE INCLUDES

1. Raspberry Pi Pico with pre-soldered header x1
2. Pico-LCD-1.14 x1
3. Pico-10DOF-IMU x1
4. Breadboard x1
5. 1*3PIN yellow pin header x1
6. Pico-Dual-Expander x1
7. USB-A to micro-B cable x1
8. Jumper wires x1

What's In The Kit 

• Raspberry Pi Pico With Pre-Soldered Header
  
  A Low-Cost, High-Performance Microcontroller Board With Flexible Digital Interfaces 

• Pico-LCD-1.14
  
  A 1.14" LCD display module specialized for Raspberry Pi Pico, embedded ST7789 driver, using SPI communication bus.

• 240×135 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect
• SPI interface, requires minimal IO pins
• 4x user buttons for easy interacting 

• Pico-10DOF-IMU
  
  An IMU sensor expansion module specialized for Raspberry Pi Pico, it can be used to collect environment sensing data like temperature and barometric pressure

• Onboard ICM20948 (3-axis gyroscope, 3-axis accelerometer, and 3-axis magnetometer) for detecting motion gesture, orientation, and magnetic field
• Onboard LPS22HB barometric pressure sensor, for sensing the atmospheric pressure of the environment 

• Pico-Dual-Expander
  
  A GPIO expander specialized for Raspberry Pi Pico, providing two sets of standard Raspberry Pi Pico GPIO male headers
  

• Two sets of 2x20 male header, allows connecting more Raspberry Pi Pico expansion modules
• Clear pinout labels on the front side, easy to use
• Immersion gold process, beautiful & practical, stunning aesthetic looking 

• 830 Quality Breadboard
  
  Easy prototyping by just inserting the components without soldering, standard 830 holes, suitable for building simple circuits, electric building block, electric DIY, and so on.
  
• 630+200=830 holes, with red/blue wires
• Dimensions: 165x55x10mm