Αρχική Σελίδα/Μηχανολογικά/Ηλεκτρομηχανικά Μέρη/Ηλεκτροβάνα 12V - NC 3/4"

Ηλεκτροβάνα 12V - NC 3/4"

Κωδικός:

19-00016347

ΚατασκευαστήςOem

Διαθέσιμο

Αποστολή σε 24 ώρες

€6⁸⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€5.44

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

Have you ever wanted to control the flow of a liquid using your computer or microcontroller, but didn’t know how? Well, here’s how: The 12V solenoid controlled fluid valve. Simply connect a fluid source to the ¾" threaded inlet and it will interrupt the flow until 12V is applied to the fast-on connectors on the solenoid.

Difference of the valve with and without Pressure:

If the water of outlets is sprayed then use the one with pressure (Work under 0.02~0.8Mpa)
If the water of outlets is small water flow then use the one without pressure (Work under 0~0.2pa)

Difference of normally closed and open one:

Normally closed: the solenoid valve have water when power on, and do not have water when power off
Normally open: the solenoid valve do not have water when power on, and have water when power off

Voltage: DC12V
Interface: Four exceptionally thread
Rated power: 5W
Pressure: This is the micro-pressure valve (with pressure), issuitable for 0.02-0.8MPA pressure
Fluid: (0-90°C) pure water, tap water
Work: Flat-rate system
Insulation: Insulation resistance between conductors and non-conductor is greater than 100MΩ
Insulation class: E class insulation

Water flow characteristics (with pressure-type):
- 0.02Mpa> 1.5L / min
- 0.10Mpa> 7L / min
- 0.30Mpa> 12L / min
- 0.80Mpa> 20L / min
Life:
- ≥50 thousand times (laboratory data)
- ≥30 million times (actually normal use)