Textured/Smooth Coated Flexible Steel Plate 235x235mm

The new Textured/Smooth Coated Flexible Steel Plate is double-sided and consists of three parts. The first is the high quality spring steel sheet and second-third that is covered with a sheet of the best PEI. One side is smooth surface and the other is matte texture can meet your needs at the same time.

The Textured/Smooth Coated Flexible Steel Plate is the perfect surface to print on, it's very durable and easy to manage. And best of all, thanks to the Flexible plate your prints will be very easy to remove. Just give it a small bend and the print will pop right off.

This Flexible Steel Plate can withstand temperatures up to 130°C without any problems, so you can even use it with ABS.

NOTES

How To Use
- Unpack your Flexible Steel Plate, if your printer has a magnetic surface, the Flexible Steel Plate will be magnetized immediately, then re-level your print bed. You are now ready to print away. Parts should come free from the surface with almost no issue at all.
- PLA does not require heat but turning the heated bed up to 45°C helps. You don´t need any adhesives but if you are going to print something large or for a long time, we recommend using the PrimaFix adhesive stick, it will make your parts stick even better and release even easier when the print is done.
- After the print is done, just let the plate cool down, remove the plate and give it a gentle bend. You can then just “pop” the model off the plate. Before each print, wipe your PEI surface down with 70-91% Isopropyl alcohol, to ensure that you wipe away any grease or other residues that may have accumulated on the surface. This will help increase your surface adhesion greatly.
- Use acetone, isopropyl alcohol, methyl alcohol, or soap to clean your PEI after use.

Flexible
PEI is one of the best surfaces you can use for printing
Very Easy to use

Fits most printers
Strong and durable

Textured/Smooth Coated Flexible Steel Plate 235x235mm - Double Sided

NOTES