Σημαντική ενημέρωση: Προτείνουμε αλλαγή κωδικού για την ασφάλειά σας (οι κωδικοί χρησιμοποιούν πολύ ασφαλή μέθοδο κρυπτογράφησης)

Στις 22/5 σημειώθηκε μη εξουσιοδοτημένη πρόσβαση στο κατάστημά μας. Μάθετε περισσότερα εδώ.

Αρχική Σελίδα/Μηχανολογικά/Κινητήρες/Οδηγοί Κινητήρων/Waveshare ESP32 Servo Driver Expansion Board

Waveshare ESP32 Servo Driver Expansion Board

Κωδικός:

31-00021593

Part Number: Servo Driver with ESP32

ΚατασκευαστήςWaveshare Part NumberServo Driver with ESP32

Κατόπιν παραγγελίας

Διαθέσιμο σε 45-60 ημέρες

Αναμένεται την Παρασκευή, 30 Μαΐος 2025

€19⁹⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€17.91

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

ESP32 Servo Driver Expansion Board with dedicated driver board designed for serial bus servos

Allows controlling up to 253 servos via the ESP32 serial port, with open source bottom layer and web application, as well as open source hexapod walker and humanoid robot structures, ideal to be used as the main controller while building robotics projects.

UART Serial Bus Control

Allows Controlling Up To 253 SC, ST Series Serial Bus Servos At The Same Time

Note: though one channel UART is able to control up to 253 bus servos, due to the high power of the servos, it is necessary to consider whether the power supply solution is enough when using too many servos.

6 ~ 12V Wide Voltage Input

The Input Voltage And The Servo Voltage Must Be Matched

Note: The input voltage must match the servo voltage, e.g. when using the SC15 Servo with a voltage of 6-8.4V, the input voltage of the DC port of the drive board should also be within the same range of 6-8.4V.

ESP32 Controller, Extensive Resources

Easy Secondary Development, Built-In WiFi And Bluetooth, As Well As ESP-NOW Support, For Remote Control And Servo Debugging

OLED Status Monitor

WiFi Remote Control

Built-In WiFi And Bluetooth, As Well As ESP-NOW Support, For Remote Control And Servo Debugging

Application Examples

Servos will provide various feedback like position, speed, torque lock, operating mode (servo mode, servo motor mode, etc.) for advanced projects requiring closed-loop automatic control
Ideal choice for building quadruped robots, hexapod walkers, robotic arms and other robotic projects requiring multiple servos

What's On Board

ESP32 main controller
Serial bus servo control interface
OLED screen
BOOT button to enter download mode
Reset button
TYPE-C connector
Automatic download circuit
RGB-LED indicator
5.5*2.1 DC power jack
RGB-LED extension interface
Onboard PCB antenna
Serial bus servo controll circuit

Features At A Glance

Allows controlling up to 253 SC, ST series serial bus servos at the same time (adequate power supply required)
Wide range voltage input 6-12V (the input voltage and the servo voltage must be matched)
Built-in WiFi and Bluetooth, as well as ESP-NOW support, for remote control and servo debugging
Automatic download circuit for easy uploading programs
Open source web application and various robot structures
Compact size and space saving, suitable for integration into sorts of space-limited projects