Waveshare GSM/GPRS/GNSS/Bluetooth HAT - SIM868

31-00013460
13460
CompanyWaveshare Part Number13460
In Stock
Ships in 24 Hours
3990
Our quantity discounts:
Quantity
10+
Price
35.91
Gropbotronics Store Availability
Availability in Retail Store
Payments & Shipping

This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth.

It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data via Bluetooth, and so on.

 

THE PACKAGE INCLUDES

  1. GSM/GPRS/GNSS HAT x1
  2. GSM Antenna x1
  3. GPS External Antenna (B) x1
  4. Bluetooth Antenna x1
  5. USB type A plug to micro plug cable x1
  6. RPi screws pack (2pcs) x1

123

456  

 

NOTES

  • The Raspberry Pi in the photo is NOT included. 

Phone Shield SIM808 on board resource

  1. SIM868 module
  2. ZMM5V1: regulator diode
  3. SMF05C: TVS diode
  4. CP2102: USB TO UART converter
  5. MP1482: power chip
  6. NDC7002N: voltage level translator
  7. GPS status indicator
  8. NET indicator:
    • flashes fast when the module starts up
    • flashes slowly after GSM register succeed
  9. STA module working status indicator
  10. SIM868 UART Tx/Rx indicator
  11. Power indicator
  12. SIM868 control button: press the button and hold for 1s, to startup/shutdown the SIM868
  13. Raspberry Pi GPIO connector
  14. SIM card slot
  15. USB TO UART interface
  16. 3.5mm earphone/mic jack
  17. GNSS antenna connector
  18. Bluetooth antenna connector
  19. GSM antenna connector
  20. CR1220 battery holder: for RTC backup battery
  21. UART selection switch
    • A: control the SIM868 through USB TO UART
    • B: control the SIM868 through Raspberry Pi
    • C: access Raspberry Pi through USB TO UART

GSM/GPRS

  • Band
    • GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz
    • Quad-band auto search
    • Compliant to GSM phase 2/2+
  • Emitting power
    • Class 4 (2W @ GSM 850/EGSM 900 MHz)
    • Class 1 (1W @ DCS 1800/PCS 1900 MHz)
  • GPRS connectivity
    • GPRS multi-slot class 12 (default)
    • GPRS multi-slot class 1~12 (configurable)
  • GPRS data feature
    • Downlink speed: max 85.6kbps
    • Uplink speed: max 85.6kbps
    • Coding schemes: CS-1\CS-2\CS-3\CS-4
    • Supports PAP (Password Authentication Protocol) for PPP connection
    • Supports PBCCH
    • Supports USSD
  • SMS
    • Supports: MT/MO/CB/Text/PDU mode
    • SMS storage: SIM card
  • Audio
    • Voice encode/decode mode: Half Rate\Full Rate\Enhanced Full Rate\Adaptive muti rate
    • Supports echo cancellation
    • Supports noise reduction

GNSS

  • Receiver type
    • 33 tracking channels
    • 99 acquisition channels
    • GPS L1 C/A code
  • Sensitivity
    • Tracking: -165 dBm
    • Cold starts : -148 dBm
  • Time-To-First-Fix
    • Cold starts : 28s (typ.)
    • Hot starts : < 1s
    • Warm starts: 26s
  • Accuracy
    • Horizontal position : <2.5m CEP

Bluetooth

  • Integrates AT commands
  • Compliant to Bluetooth specification3.0 + EDR
  • Supports SPP, OPP, HFP/HSP, etc.
  • Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
  • Bluetooth 3.0, supports data transferring through Bluetooth
  • Onboard USB TO UART converter CP2102 for UART debugging
  • 6x LEDs for indicating the module working status
  • SIM card slot for 1.8V/3V SIM card
  • RTC with backup battery holder
  • Baudrate auto detection (1200bps ~115200bps)
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
  • Supports SIM application toolkit: GSM 11.14 Release 99
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Comparison table
ModelWaveshare GSM/GPRS/GNSS/Bluetooth HAT - SIM868Waveshare GSM/GPRS/Bluetooth HAT - SIM800CWaveshare GSM/GPRS HAT - R800C
GRobotronics SKU31-0001346031-0001615731-00023459
Frequency band
GSMGSM: 850/900/1800/1900 MHz Quad-band auto search Compliant to GSM phase 2/2+GSM: 850/900/1800/1900 MHz Quad-band auto search Compliant to GSM phase 2/2+GSM: 850/900/1800/1900 MHz Quad-band auto search Compliant to GSM phase 2/2+
GNSSGPS, GLONASS, BeiDou--
BluetoothIntegrates AT commands Compliant to Bluetooth specification3.0 + EDR Support functions such as SPP, OPP, HFP/HSPIntegrates AT commands Compliant to Bluetooth specification3.0 + EDR Support functions such as SPP, OPP, HFP/HSP-
Data transmission
GPRS (Kbps)85.6(DL)/85.6(UL)85.6(DL)/85.6(UL)85.6(DL)/85.6(UL)
Others
Network protocolTCP/UDP/HTTP/HTTPS/SSL/TLS/FTP, etc.TCP/UDP/HTTP/HTTPS/SSL/TLS/FTP, etc.TCP/UDP/HTTP/HTTPS/SSL/TLS/FTP, etc.
Internet accessPPPPPPPPP
SIM card slot1.8V/3V1.8V/3V1.8V/3V
UARTSupport UART to send and receive AT commandsSupport UART to send and receive AT commandsSupport UART to send and receive AT commands
USB portfor testing AT commands, getting GPS positioning data, firmware upgrade, etc.for powering and catching log-
AudioOnboard audio jack for phone calls-Onboard audio jack for phone calls
Antenna connectorGSM antenna + Bluetooth antenna + GNSS antennaGSM antenna + Bluetooth antennaGSM antenna
Power supply5V (USB port or pinheader)5V (USB port or pinheader)5V (USB port or pinheader)
Logic level5V/3.3V (default)5V/3.3V (default)5V/3.3V (default)
Operating temperature-40 ~ 85°C-40 ~ 85°C-40 ~ 85°C
Storage temperature-45°C ~ 90°C-45°C ~ 90°C-45°C ~ 90°C
Dimensions30.4 × 65.0mm30.4 × 65.0mm30.5 × 65.0mm
Applications
Applicable regionsApplicable to countries or regions with 2G network coverage
ExamplesEnvironmental monitoring, Smart payment, Smart home, Smart city, Intelligent agriculture and animal husbandry, etc.
Company
Waveshare
Part Number
13460
Connection
  • UART (Serial TTL)
  • USB
Warranty
12 Month Manufacturer Warranty
G. Weight
0.149kg
HAT Type
  • Wireless Communication
Συμβατότητα HAT
  • Raspberry Pi 4
  • Raspberry Pi 5
  • Raspberry Pi Zero
Find similar
  • We suggest also