Σημαντική ενημέρωση: Προτείνουμε αλλαγή κωδικού για την ασφάλειά σας (οι κωδικοί χρησιμοποιούν πολύ ασφαλή μέθοδο κρυπτογράφησης)

Στις 22/5 σημειώθηκε μη εξουσιοδοτημένη πρόσβαση στο κατάστημά μας. Μάθετε περισσότερα εδώ.

Αρχική Σελίδα/Ρομποτική/Raspberry Pi/Raspberry Pi Πρόσθετα (HATs)/Waveshare NB-IoT/Cat-M(eMTC)/GNSS HAT

Waveshare NB-IoT/Cat-M(eMTC)/GNSS HAT

Κωδικός:

31-00017693

ΚατασκευαστήςWaveshare ΣυμβατότηταRaspberry Pi 4, Raspberry Pi 5, Raspberry Pi Zero Τύπος HATWireless Communication

Κατόπιν παραγγελίας

Διαθέσιμο σε 45-60 ημέρες

€39⁹⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€35.91

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

NB-IoT/Cat-M(eMTC)/GNSS HAT for Raspberry Pi, Based on SIM7080G, Globally Applicable

This is a telecommunication HAT which features multi communication functionalities: NB-IoT (NarrowBand-Internet of Things), Cat-M (aka eMTC, enhanced Machine Type Communication), and GNSS (Global Navigation Satellite System).

With the developing of telecommunication technology LTE, 2G/3G networks are fading away, the future world would be dominated by IoT technologies consisting of low bandwidth NB-IoT/Cat-M and high bandwidth 4G/5G standards.

This HAT supports global bands of NB-IoT and Cat-M, as well as positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

SIM7080G Cat-M/NB-IoT HAT x1
LTE antenna x1
GPS External Antenna (B) x1
USB type A plug to micro plug cable x1
2×20PIN female header x1
RPi screws pack (2pcs) x1

Communications Specifications

	NB-IOT	CAT-M (EMTC)
Band	NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85
Emitting power	Class 5 (0.125W@LTE)
Data rate	Uplink≤150kbps Downlink≤136kbps	Uplink≤1119kbps Downlink≤589kbps
Supported SIM Card	NB-IoT / Cat-M card (1.8V SIM card ONLY)
Applicable region	Global

GNSS Specifications
- Receiver type
  - 16-channel
  - C/A code
- Bands
  - GNSS L1: 1575.42±1.023MHz
  - GLONASS: 1597.5~1605.8 MHz
  - BeiDou: 1559.05~1563.14 MHz
  - Galileo L1: 1575.42±1.023MHz
- Update frequency: 1 Hz (default)
- Data format: NMEA-0183
- Antenna: active antenna

Other Specifications
- Power supply voltage: 5V
- Logic level: 5V / 3.3V (configured via jumper)
- Overall current (idle mode): 39mA
- Module sole current (VBAT=3.8V):
  - Idle mode: 10mA
  - Sleep mode: 1.2mA
  - PSM mode: 3.2uA
  - eDRX mode: 0.59mA (eDRX=81.92s)
- Operating temperature: -40°C ~ 85°C
- Storage temperature: -45°C ~ 90°C
- Dimension: 30.2x65mm

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports communication protocols such as TCP / UDP / HTTP / HTTPS / TLS / DTLS / PING / LWM2M / COAP / MQTT
Supports GNSS positioning (GPS, GLONASS, BeiDou, and Galileo)
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper

SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available)
3x LED indicators, easy to monitor the working status
Baudrate: 300~3686400 bps
Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)