Are you looking to add a lot of color to your project? These large 64x64 RGB LED panels are an awesome place to start. You can create animations, games, or all sorts of other fun displays with them. Yes, you read that right: a 64x64 LED matrix, that’s 4096 LEDs on a 128×128mm board. On top of all that, thanks to two IDC connectors, and a seamless frame, these panels can be daisy chained together to form even bigger LED displays.
These panels require a regulated 5V supply for power which needs to be able to source a good amount of current – up to 3A in the worst case. Included with each panel is a 0.15" pitch 4-pin polarized connector power cable which is terminated with both a female polarized connector, and a pair of spade terminals. Needless to say, if you are looking for a large, cheap, and easy to use RGB LED matrix you’ve come to the right place.
THE PACKAGE INCLUDES
- RGB-Matrix-P2-64x64 LED matrix and accessories x1
- Power supply terminal adapter x1
- 16P wire ~30cm x1
NOTES
- Each RGB LED matrix panel requires a standalone 5V/3A or above power supply, when they're chained to display.
- PCB silkscreen and layout may have small differences from batch to batch, but the software is compatible.
- It is recommended to used with a 5V 4A power supply.
Header Definition
| PIN | DESCRIPTION | PIN | DESCRIPTION |
|---|---|---|---|
| +5V | 5V power input | GND | Ground |
| R1 | R higher bit data | R2 | R lower bit data |
| G1 | G higher bit data | G2 | G lower bit data |
| B1 | B higher bit data | B2 | B lower bit data |
| A | A line selection | B | B line selection |
| C | C line selection | D | D line selection |
| E | E line selection | CLK | clock input |
| LAT/STB | latch pin | OE | output enable |
- Dimensions: 128x128mm
- Pixels: 64x64=4096 DOTS
- Pitch: 2mm
- Pixel Form: 1R1G1B
- Viewing Angle: ≥140°
- Control Type: Synchronization
- Driving: 1/32 scan
- Header: HUB75
- Power Supply: 5V / 3A (VH4 header input)
- Power: ≤15W
- 4096 individual RGB LEDs, full-color display, adjustable brightness
- 64×64 pixels, 2mm pitch, allows displaying text, colorful image, or animation
- 128×128mm dimensions, moderate size, suitable for DIY desktop display or wall mount display
- Onboard two HUB75 header, one for controller data input, one for output, chain support
- Provides open source development resources (examples for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino)
