Αρχική Σελίδα/3D Εκτύπωση/Ανταλλακτικά & Αναβάθμιση/Κεντρικές Πλακέτες/3D Printer Controller Board 32 Bit with TMC2209 - SKR E3 V3.0

3D Printer Controller Board 32 Bit with TMC2209 - SKR E3 V3.0

Κωδικός:

59-00018844

ΚατασκευαστήςBIQU

Κατόπιν παραγγελίας

Διαθέσιμο σε 10-30 ημέρες

€59⁹⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€53.91

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

BIGTREETECH SKR MINI E3 V3.0 Controller Board, New Upgrade Silent Board for Ender 3 3D Printer. Increase the powerful cooling function, quieter and smarter. Look hot! Keeps cool!

Is a simple upgrade for the Creality Ender and CR-10 series. Compared to the original 8-bit motherboard, the stronger 32-bit SKR MINI E3 V3.0 motherboard has much higher performance and more interfaces for DIY modifications.

The motherboard was specially created for a trouble-free upgrade and can be used very easily instead of the original.

In contrast to the previous version, the SKR MINI E3 V3.0 is hardware upgraded and is no longer only compatible with the Ender 3, but also with Ender 5, Ender 5 Pro, CR-10S/S4/S5 3D printers.

Compatible Screens:

BTT TFT touchscreens: 2.4 / 3.5 inches
LCD12864 (original LCD screen from Creality)

Fan Connectors

3 x controllable CNC fans

Other Interesting Interfaces

Module for BLTouch, TFT touchscreen, Neopixel LED strips
5V power interface
RGB interface
Automatic shutdown after printing
Power failure detection module
Filament sensor
BLTouch interface
Dual Z-axis interface
Micro USB port

Other Features:

MCU: ARM Cortex M0 + STM32G0B1RET6
Motor driver: UART mode on-board TMC2209
High-performance MOSFET for better heat dissipation
Improved thermal performance
On-board sensorless homing function
Protected thermistor connections
32-bit mainboard
Improved performance
More stable pressure
Easy exchange
Recommended software: Cura, Simplify 3D, pronterface, Repetier-host, Makerware

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

1x Motherboard SKR E3 V3.0
1x USB cable A to B
5x Jumper Pins

ΣΗΜΕΙΩΣΕΙΣ

This product is a motherboard specially designed for Ender3 printers. For use on other printers, please refer to the corresponding electrical parameters of Ender3 (such as hot bed power,heating rod power, etc.), must not exceed the Ender3 machine electrical.
The LCD screen only supports the LCD12864 screen of CR10_STOCKDISPLAY interface.
On initial use, the SD card must have a firmware.bin file installed on it prior to powering up. This will install firmware onto the board and allow your computer to recognize it as a USB device.
Included on-board stepper drivers TMC2209.

Material: 4-layer PCB
MPU: ARM Cortex-M0+ STM32G0B1RET6
Main Control Chip: LPC1768
Input Voltage: DC12V-DC24V
Logic Voltage: 3.3V
Current: 5A-15A
Support Display:
- 2.4" TFT
- 3.5" TFT
- Ender3 original LCD12864
Removable Fuses
Motor Driver: Integrated TMC2209-UART
Motor Drive Interface: XM, YM, ZAM, ZBM, EM, 5 channel
Support file format: G-code
Temperature Sensor Interface:
- TH0
- THB
- 2 channel 100K NTC (thermal resistance)
Dimensions: 100x70.25mm
Compitable: Ender3, Ender5, CR-10 Printer
PC communication interface: USB Micro B type
Recommended software: Cura, Simplify 3D, Pronterface, Makerware

Main Control Chip - Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6.

Three CNC Fan - Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working.

Increased Heat Sink - Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly improve the heat dissipation performance.

USB Micro B - The PC communication USB interface is upgraded from Mini USB to Micro USB B, which is more adaptable.

Output Power Supply - Increase SPI output port +3.3V power supply, external SPI sensor power supply voltage +3.3V and +5V are optional, support the motherboard to directly supply power to peripherals.