FREE SHIPPING for orders over 85.00

DFRobot UART Non-contact Optical Turbidity Sensor for Arduino

by DFROBOT
This non-contact turbidity sensor detects water quality by measuring the level of turbidity. Based on the optics principle, it is capable of detecting the...
25-00016138
Gross Weight: 0.02kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: DFROBOT
Part Number: SEN0554
Made in: China
In Stock
Ships in 24 Hours
No stock in retail store
12.80
Without VAT 10.32
+
WISHLIST COMPARE

DESCRIPTION

This non-contact turbidity sensor detects water quality by measuring the level of turbidity. Based on the optics principle, it is capable of detecting the light transmittance and scattering rate of the liquid in transparent cylinder containers with a diameter of 40–50mm, which will then be output as an analog value within a certain range that reflects the level of liquid turbidity.

The turbidity sensor comes with two infrared probes, which should be oppositely installed on a container. And it detects when the liquid level inside is higher than the two probes. The sensor can measure without coming into contact with liquid, making it less susceptible to corrosion from water or chemicals.

Installation

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
DFROBOT
Part Number:
SEN0554
Gross Weight:
0.02kg
Made in:
China
Sensor Type:
  • Turbidity
Typical Input Voltage:
  • 5VDC
Oparating Current:
10mA
Interface:
  • Digital
Communication Protocol:
  • UART

EXTRA SPECS

  • Supply Voltage: 5V
  • Communication Mode: UART-TTL
  • Applicable Cylinder Container Diameter: 40 to 50mm
  • Baud Rate: 9600
  • Operating Current: less than 10mA
  • Response Time: less than 1s
  • Operating Temperature: 5 to 60℃
  • Storage Temperature: 0 to 65℃
  • Service Life: 50000h

FEATURES

  • No mechanically moving parts, high reliability
  • Small size & low cost

Applications

  • Water quality monitoring system

FILES

WE SUGGEST ALSO