+302118004320
English (GB)
0Cart

Digital Temperature & Humidity Sensor (AM2301)

19-00012301
CompanyOem
In Stock
Ships in 24 Hours
€790
Our quantity discounts:
Quantity
10+
Price
€6.32
+ −
Add to wish list
Ask a question
Gropbotronics Store Availability
Availability in Retail Store
Payments & Shipping

This temperature & Humidity sensor is a wired version of the DHT21, in a large plastic body. It is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

Simply connect the red 3-5V power, the yellow wire to your data input pin and the black wire to ground. Although it uses a single-wire to send data it is not Dallas One Wire compatible! If you want multiple sensors, each one must have its own data pin!

  • 3.5-5.5V Input
  • 1-1.5mA measuring current
  • Humidity from 0-100% RH
  • -40 - 80 degrees C temperature range
  • +-3% RH accuracy
  • +-0.5 degrees C
Warranty
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company
Oem
G. Weight
0.016kg
Sensor Type
  • Humidity
  • Temperature
Typical Input Voltage
  • 3.3VDC
  • 5VDC
Oparating Current
1.5mA
Interface
  • Digital
Communication Protocol
  • Dallas 1-Wire
Find similar
  • We suggest also