This fantastic new Electro-Fashion kit from Kitronik has been specially designed so that electronics can easily be used in textile applications - without soldering!
The kit includes conductive thread (which is a thread that can be used like cotton thread but conducts electricity like a wire), our own custom designed Sewable Coin Cell Holder, one coin cell battery, and two ultra slim, pre-mounted, easy sew E-Textile LEDs.
The coin cell holder has the benefit of large, easy-to-stitch connection points (no more difficult little holes!) and clearly marked terminals that show the battery polarity.
The LEDs are less than 3mm tall and are also clearly marked with '+' and '-' to indicate which is the positive and which is the negative connection. The PCBs are double sided, making the conductive thread connection very reliable (see example picture below).
Features:
- Ultra Slim Sewable LEDs
- Easily add lights to textiles projects
- Easy-to-stitch connection points
- Clearly marked '+' and '-' connections.
- No soldering required
Contents:
- 1 x Coin Cell Holder
- 2 x Electro-Fashion® LEDs Blue
- 1 x 2m Conductive Thread
- 1 x CR2032 3V Coin Cell
Dimensions:
- Sewable Coin Cell Holder Length: 34mm
- Sewable Coin Cell Holder Width: 20mm
- Sewable Coin Cell Holder Height: 4.5mm
- LED Length: 15mm
- LED Width: 6.5mm
- LED Height: 2.7mm
- CR2032 Battery Height: 3.2mm
- CR2032 Battery Diameter: 20mm
Requires:
- Scissors
- Needles
Resources:
