Home/Robotics/Displays/OLED Display/Fermion Monochrome 0.96" 128x64 I2C/SPI OLED Display

Fermion Monochrome 0.96" 128x64 I2C/SPI OLED Display

SKU:

25-00016312

Part Number: DFR0650

CompanyDFRobot Part NumberDFR0650

In Stock

Ships in 24 Hours

€18⁰⁰

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default. With its high contrast, simple wiring and low power consumption, it can be applied to many display applications, such as wearable display devices, Mini small game consoles, desktop widgets, etc.

This 0.96” OLED display module supports both 3.3V and 5V. The display module adopts a high-contrast, low-power OLED display. It is compatible with controllers such as Arduino UNO, Leonardo, ESP32/ESP8266, FireBettle-M0 and so on. Internal power-on reset processing, I2C communication methods, so that your welding line will be more convenient and simpler. If you want to change I2C communication to SPI, you just need to change the resistor position. In addition, the display is in an aluminum frame package that protects the screen from damage, and also prevents you from scratching that caused by the glass edge of the screen.

NOTES

Turn the pixels off when you are not using the display to prevent the use of some pixels too long to darken them, which will cause the brightness uniformity problem.

Operating voltage: 3.3V to 5V
Color: white pixels
Number of pixels: 128 columns x 64 rows
Interface: I2C (in default) / SPI
I2C address: 0x3C
Drive chip: SSD1306
Brightness: 180 (Typ) cd/m2
Full-screen lighting power:
- approx. 24mA*3.3V/5V(I2C);
- approx. 27mA*3.3V/5V(SPI)
Full-screen off power consumption:
- approx. 2mA*3.3V/5V(I2C)
- approx. 2.87mA*3.3V/5V(SPI)
Operating temperature: -30°C to 70°C
Display area: 21.744x10.864mm
Size: 30.00x30.00mm
Weight: 4.2 g