Gravity Αναλογικός Αισθητήρας Θολότητας για Arduino

25-00000189
SEN0189
Διαθέσιμο
Αποστολή σε 24 ώρες
1360
Gropbotronics Store Availability
Διαθεσιμότητα Καταστημάτων
Πληρωμή & Μεταφορικά

The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases. You may also check Liquid Sensor Selection Guide to get better familar with our liquid sensor series.

This arduino turbidity sensor have both analog and digital signal output modes. You can select the mode according to the MCU as threshold is adjustable in digital signal mode.

Turbidity sensors can be used in measurement of water quality in rivers and streams, wastewater and effluent measurements, sediment transport research and laboratory measurements.

ΤΟ ΠΑΚΕΤΟ ΠΕΡΙΕΧΕΙ

  • 1xTurbidity sensor adapter
  • 1x Turbidity sensor probe
  • 1x Turbidity sensor cable
  • 1x Gravity analog sensor cable

 

ΣΗΜΕΙΩΣΕΙΣ

  • Please note that the top of probe is not waterproof!

  • Operating Voltage: 5V DC
  • Operating Current: 40mA (MAX)
  • Response Time: <500ms
  • Insulation Resistance: 100M (Min)
  • Output Method:Analog
  • Analog output: 0-4.5V
  • Digital Output: High/Low level signal (you can adjust the threshold value by adjusting the potentiometer)
  • Operating Temperature: 5℃~90 ℃
  • Storage Temperature: -10℃~90℃
  • Dimensions: 38x28x10mm
  • Weight: 30g
Κατασκευαστής
DFROBOT
Μικτό Βάρος
0.027kg
Τύπος Αισθητήρα
  • Θολότητας
Τυπική Τάση Εισόδου
  • 5VDC
Ρεύμα Λειτουργίας
40mA
Διασύνδεση
  • Αναλογική
Πρωτόκολλο Eπικοινωνίας
  • Χωρίς
Βρες Παρόμοια