FREE SHIPPING for orders over 85.00

Gravity H2S Sensor (Calibrated) - I2C & UART

by DFROBOT
This is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the...
25-00016250
Gross Weight: 0.01kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: DFROBOT
Part Number: SEN0467
Made in: China
Upon order
Contact us
No stock in retail store
89.90
Without VAT 72.50

DESCRIPTION

This is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of hydrogen sulfide in the environment. Can be widely used in the detection of hydrogen sulfide in industrial, underground, and environmental protection fields.

The probe adopts the electrochemical principle, has the characteristics of strong anti-interference ability, high stability, high sensitivity, etc., and the service life is as long as two years. The sensor has 32 modifiable I2C addresses, an integrated temperature compensation algorithm, and a threshold alarm function, It has good compatibility with mainstream main control devices such as Arduino, ESP32, and Raspberry Pi. The easy-to-use Gravity interface, coupled with our sample code, can quickly build a hydrogen sulfide concentration detector.

DFRobot has introduced 12 gas detection sensors in this series, CO, O2, NH3, H2S, NO2, HCL, H2, PH3, SO2, O3, CL2, HF, which are used in exactly the same way and data format, so you can combine them according to your needs.

THE PACKAGE INCLUDES

  • Gravity: H2S Signal Conversion Board x1
  • H2S sensor probe x1
  • Gravity - 4pin Cable x1

 

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
DFROBOT
Part Number:
SEN0467
Gross Weight:
0.01kg
Made in:
China
Sensor Type:
  • Gas
Typical Input Voltage:
  • 3.3VDC
  • 5VDC
Oparating Current:
5mA
Interface:
  • Digital
Communication Protocol:
  • I2C
  • UART

EXTRA SPECS

  • Detection Gas: Hydrogen sulfide (H2S)
  • Detection range: 0~100ppm
  • Working Voltage: 3.3~5.5V DC
  • Working Current: <5mA
  • Output Signal: I2C, UART (0~3V), analog voltage
  • Working Temperature: -20~50℃
  • Working Humidity: 15~90%RH (non-condensing)
  • Storage Temperature: -20~50℃
  • Storage Humidity: 15~90%RH (non-condensing)
  • Lifespan: >2 years (in the air)
  • Adapter Plate Size: 37x32mm
  • Compatibility: Arduino, ESP32, Raspberry pi

FEATURES

  • Strong anti-interference ability
  • High stability
  • High sensitivity
  • Applications:
    • Underground hydrogen sulfide detection
    • Industrial hydrogen sulfide detection
    • Environmental protection device

FILES