ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

PC817 2-Channel Optocoupler Isolation Board

από OEM
Πρόκειται για μια πλακέτα με optocoupler isolation PC817 με 2 κανάλια. Έχει ενσωματωμένα 2 κανάλια 817 που είναι ανεξάρτητα, οπότε μπορεί να επιτευχθεί ταυτόχρονα διαφορετικός έλεγχος τάσης. Χρησιμοποιεί τον αμφίδρομο optocoupler 817 που μπορεί να στείλει το σήμα ελέγχου και το σήμα απομόνωσης και μπορείτε να το χρησιμοποιήσετε απευθείας σε μικροελεγκτή όπως το Aruino Uno ή άλλες συσκευές με θύρα IO.
19-00019842
Ογκομετρικό βάρος: 0.02kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: OEM
Χώρα Προέλευσης: Κίνα
Διαθέσιμο
Αποστολή σε 24 ώρες
Διαθέσιμο στο φυσικό κατάστημα
2.40
Χωρίς ΦΠΑ 1.94
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+ 100+
Τιμή 1.92 1.68

ΠΕΡΙΓΡΑΦΗ

This is a PC817 2-Channel Optocoupler Isolation Board. Onboard with 2-Channel 817 are independent, so can achieve different voltage control at the same time. Using 2-way 817 optocoupler, to achieve the control signal and the control signal isolation, you can directly use the microcontroller or other devices IO port to achieve voltage isolation control, you can achieve a small voltage control, the control side can be an external transistor MOS tube or different voltage levels Of the device interface.

Applications:

  • I/O isolation for MCUs (Micro Controller Units)
  • Noise suppression in switching circuits
  • Signal transmission between circuits of different potentials and impedances

 

ΣΗΜΕΙΩΣΕΙΣ

  • The port of entry is shared with GND.
  • The output ports are independent of each other.
  • It is exit optocoupler. V and G will connect after entering valid signal at the input port.
  • The terminals may differ in color and material.
  • The choice is random. Thanks for understanding.

 

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Είδος Περιφερειακού:
  • Ρελέ
Κατασκευαστής
:
OEM
Μικτό Βάρος:
0.02kg
Χώρα Προέλευσης:
Κίνα

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Driving Port Signal Voltage: 3.6-24V
  • Output Port Voltage Port: 3.6-30V
  • Jumper cap can achieve output port is high potential Or pull down output
  • Dimensions: 38.3x29.3x12mm
  • Mounting: 4 Holes 3.3mm