Σημαντική ενημέρωση: Προτείνουμε αλλαγή κωδικού για την ασφάλειά σας (οι κωδικοί χρησιμοποιούν πολύ ασφαλή μέθοδο κρυπτογράφησης)

Στις 22/5 σημειώθηκε μη εξουσιοδοτημένη πρόσβαση στο κατάστημά μας. Μάθετε περισσότερα εδώ.

Αρχική Σελίδα/Ηλεκτρονικά/Ρελέ/Relay Module - 1 Channel 5V 30Α

Relay Module - 1 Channel 5V 30Α

Κωδικός:

19-00016281

ΚατασκευαστήςOEM

Διαθέσιμο

Αποστολή σε 24 ώρες

€3⁶⁰

Ποσοτικές εκπτώσεις:

Ποσότητα

10+

Τιμή

€2.88

+ −

Κάνε μια ερώτηση

Διαθεσιμότητα Καταστημάτων

Πληρωμή & Μεταφορικά

Περιγραφή
Χαρακτηριστικά

The Single Channel 5V 30A Relay Module Power Failure Relay is a 1-channel relay module board with LED indicators, It can be controlled by microcontrollers such as Arduino, AVR, PIC, ARM any other microcontroller operating at 5V.

The relay module uses an authentic quality mechanical relay and the industry’s top-quality subminiature two-way isolation optical coupling which gives you a strong anti-interference ability, and stable performance.

The user can choose the relay control level, can be a high level off, also can be low level and off. The Single-channel 5V 30A Relay Module Power Failure Relay contains a limited flow resistance, can directly use the power supply is negative control, you can also use the MCU I/O control.

The relay module equips a power indicator light (red), 1 road relay status indicator light (blue). With this relay, you can easily control electrical appliances, lights, etc.

Fault-tolerant design, even if the control line is broken, the relay will not move.

Module interface:

DC+: DC power supply positive pole
DC-: DC power supply negative pole
IN: signal triggering pin
JD+: relay control voltage positive
JD-: relay control voltage negative

Voltage: 5VDC
Current: 30A
The static current: 5mA
Working Current: 190mA
Trigger current: 2 to 4mA

AC Load Voltage: 250V @30A
DC Load Voltage: 30V @30A
Dimensions: 50x33x24mm
Weight: 36g

Optical coupling isolation, driving ability is strong, stable performance; Trigger current is 5mA
The module can be set high level or low-level trigger by the jumper
Rated current of the interface is 16A

DC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal.
High and low-level trigger mode selection. Jumper and L pin connection, IN pin, is low-level trigger Jumper and H pin connection, IN pin, is the high-level trigger.