FREE SHIPPING for orders over 85.00

Waveshare Environmental Sensor - BME680

BME68X Environmental Sensor Supports temperature, humidity, barometric pressure and gas detection Supports Raspberry Pi / Raspberry Pi Pico / Arduino...
31-00024245
Gross Weight: 0.01kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: WAVESHARE
Part Number: BME680 Environmental Sensor
Made in: China
In Stock
Ships in 24 Hours
No stock in retail store
13.60
Without VAT 10.97
+
Our quantity discounts:
Quantity 10+
Price 12.24
WISHLIST COMPARE

DESCRIPTION

BME68X Environmental Sensor

Supports temperature, humidity, barometric pressure and gas detection
Supports Raspberry Pi / Raspberry Pi Pico / Arduino / ESP32...

Version Options

Supports I2C And SPI Interfaces Control
For Use With Controller Boards Like Raspberry Pi/Raspberry Pi Pico/ESP32/Arduino

PIN I2C SPI
CS NC SPI chip selection, low active
ADDR/MISO I2C address chip selection
high level (default) address: 0x77
Shorting onboard ADDR pad, the address is 0x76
SPI data master input/slave output
SCL/SCK I2C clock SPI clock input
SDA/MOSI I2C data SPI data master output/slave input
GND Ground
VCC 3.3V/5V power supply

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
WAVESHARE
Part Number:
BME680 Environmental Sensor
Gross Weight:
0.007kg
Made in:
China
Sensor Type:
  • Barometric Pressure
  • Gas
  • Humidity
  • Temperature
Typical Input Voltage:
  • 3.3VDC
  • 5VDC
Interface:
  • Digital
Communication Protocol:
  • I2C
  • SPI

EXTRA SPECS

  • Detection Support: Barometric pressure, Environmental temperature, Relative humidity, VOC gas change detection (supports IAQ calculation in combination with the software package)
  • Communication Interfaces: I2C and SPI
  • Temperature Sensing:
    • Range: -40~85°C
    • Accuracy: ±1.0℃ (0~65℃)
  • Humidity Sensing: 
    • Range: 0~100%RH
    • Accuracy: ±3%RH
  • Barometric Pressure Sensing:
    • Range: 300~1100 hPa
    • Accuracy: ±0.6hPa (0~65℃)
  • Gas Sensing: Supports VOC gas change detection
  • Dimensions: 27x20mm

FEATURES

  • Onboard BME68X sensor to measure temperature, humidity, barometric pressure, and gas
  • Supports I2C communication, I2C address configurable, with I2C bus cascading support
  • Supports SPI communication, enabled via CS pin (I2C bus by default)
  • Onboard voltage translator, compatible with 3.3V/5V level
  • Comes with online development resources and manual (examples for Raspberry Pi / Raspberry Pi Pico / Arduino / ESP32)

FILES