Από 11/2 το φυσικό μας κατάστημα στην Τζώρτζ και η Reception στον Άγιο Δημήτριο θα λειτουργουν αυστηρά μόνο για επαγγελματίες.
 
 
FREE SHIPPING for orders over 85.00

Display 1.5" RGB 128x128 OLED Module

This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via...
31-00014747
Gross Weight: 0.01kg
Company: Waveshare
Part Number: 14747
Made in: China
In Stock
Ships in 24 Hours
Low stock in store
18.90
Without VAT 15.24
+
WISHLIST COMPARE

DESCRIPTION

This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.

  • 128x128 high resolution, 65K colors, clearly displays colorful images
  • Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

 

THE PACKAGE INCLUDES

  1. 1.5inch RGB OLED Module x1
  2. PH2.0 7Pin x1
12

1.5inch RGB OLED Module dimensions

SPECIFICATIONS

Oparating Voltage:
3 - 5VDC
Input Voltage:
3.3 or 5VDC
Interface:
  • Digital
Type:
OLED
Display Size:
1.5"
Resolution:
128x128
Aspect Ration:
  • 4:3
Display Color:
RGB
Touchscreen:
No
Interface:
  • SPI

SPECIFICATIONS

  • Driver: SSD1351
  • Interface:
    • 4-wire SPI
    • 3-wire SPI
  • Display color: RGB, 65K colors
  • Resolution: 128x128
  • Viewing angle: >160°
  • Operating voltage:
    • 3.3V
    • 5V
  • Dimension: 44.5x37mm
SYMBOL DESCRIPTION
VCC Power (3.3~5V input)
GND Ground
DIN Data input
CLK Clock data input
CS Chip selection, low active
DC 4-wire SPI: Data/Command selection (high for data, low for command)
3-wire SPI: Connects to GND, keeps low
RST Reset, low active

There are two available drive interfaces for this RGB OLED module: 4-wire SPI (default) and 3-wire SPI:

  BS DC
4-wire SPI 0 DC
3-wire SPI 1 Connects to GND