FREE SHIPPING for orders over 85.00

Display 1.5" RGB 128x128 OLED Module

This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via...
31-00014747
Gross Weight: 0.01kg
Warranty: Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company: WAVESHARE
Part Number: WHS14747
Made in: China
In Stock
Ships in 24 Hours
Low stock in store
19.90
Without VAT 16.05
+
Our quantity discounts:
Quantity 10+
Price 18.91
WISHLIST COMPARE

DESCRIPTION

This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.

  • 128x128 high resolution, 65K colors, clearly displays colorful images
  • Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

 

THE PACKAGE INCLUDES

  1. 1.5inch RGB OLED Module x1
  2. PH2.0 7Pin x1
12

1.5inch RGB OLED Module dimensions

SPECIFICATIONS

Warranty:
Δεν καλύπτεται με εγγύση απο τον Κατασκευαστή
Company:
WAVESHARE
Part Number:
WHS14747
Gross Weight:
0.005kg
Made in:
China

EXTRA SPECS

  • Driver: SSD1351
  • Interface:
    • 4-wire SPI
    • 3-wire SPI
  • Display color: RGB, 65K colors
  • Resolution: 128x128
  • Viewing angle: >160°
  • Operating voltage:
    • 3.3V
    • 5V
  • Dimension: 44.5x37mm
SYMBOL DESCRIPTION
VCC Power (3.3~5V input)
GND Ground
DIN Data input
CLK Clock data input
CS Chip selection, low active
DC 4-wire SPI: Data/Command selection (high for data, low for command)
3-wire SPI: Connects to GND, keeps low
RST Reset, low active

There are two available drive interfaces for this RGB OLED module: 4-wire SPI (default) and 3-wire SPI:

  BS DC
4-wire SPI 0 DC
3-wire SPI 1 Connects to GND