Home/Robotics/Sensors/Gas Sensors/Gravity Analog CO2 Gas Sensor - MG-811

Gravity Αναλογικός Αισθητήρας CO2 - MG-811

Gravity Analog CO2 Gas Sensor - MG-811

SKU:

25-00016105

Part Number: SEN0159

CompanyDFRobot Part NumberSEN0159

In Stock

Ships in 24 Hours

€69⁹⁰

+ −

Ask a question

Availability in Retail Store

Payments & Shipping

Description
Specifications

"Greenhouse Effect" is melting the Earth ice core every minute and creating dangerous icebergs. By knowing the exact concentration of CO2(Carbon Dioxide), we can do something to reduce the CO2 and to protect our Earth. Here is the Arduino-based CO2 sensor designed by DFRobot lovely engineer.

This is the first CO2 sensor in the Arduino market. The output voltage of the module falls as the concentration of the CO2 increases. The potentiometer onboard is designed to set the threshold of voltage. As long as the CO2 concentration is high enough (the voltage is lower than the threshold), a digital signal (ON/OFF) will be released.

It has MG-811 sensor module which is highly sensitive to CO2 and less sensitive to alcohol and CO, low humidity & temperature dependency.
Onboard heating circuit brings the best temperature for the sensor to function. Internal power boosting to 6V for heating sensor best performance.
This sensor has an onboard conditioning circuit for amplifying output signal.

To ease the difficulty of using this CO2 sensor, a Gravity Interface is adapted to allow plug&play. The Arduino IO expansion shield is the best match for this CO2 senor connecting to your Arduino microcontroller.

This is an electrochemical Arduino-based CO2 sensor, it is suitable for qualitative analysis. There are other Infrared CO2 sensors, which could make a quantitative analysis.

Operating Voltage: 5V
Operation Voltage: 3.7～5V
Output:
- Analog (Analog2.7～4.1V)
- 3P Header Digital Output(Alarm): 0～VCC Level
Measurement Principle: Electrochemistry Solid electrolyte battery principle）
Measurement Range: 0～10000 ppm
Accuracy: ±100ppm@400ppm
Response Time: <20s
Average Power: <1W
Operation Temperature: -20℃～50℃
Operation Humidity: 0～95% RH (No condensation)
Lifespan: >1 years
Dimension (PCB): 32x42mm
One digital output
High-quality connector
Immersion gold surface
Onboard heating circuit