ΔΩΡΕΑΝ ΜΕΤΑΦΟΡΙΚΑ για παραγγελίες άνω των 85.00 έως 2kg

Pi Zero Display e-Paper 2.13" HAT 250x122 Touch with case (White-Black)

από WAVESHARE
2.13inch Touch E-Paper E-Ink capacitive touch e-Paper display For Raspberry Pi Zero, 250×122 Pixels, with ABS Protection Case. With partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect. Specialized for Raspberry Pi Zero / Zero W
31-00020716
Ογκομετρικό βάρος: 0.02kg
Εγγύηση: Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής: WAVESHARE
Part Number: 2.13inch Touch e-Paper HAT (with case)
Διαθέσιμο
Αποστολή σε 24 ώρες
Χωρίς απόθεμα στο φυσικό κατάστημα
28.60
Χωρίς ΦΠΑ 23.06
+
Τιμές βάση ποσότητας (Λιανική - Χονδρική):
Ποσότητα 10+
Τιμή 25.74

ΠΕΡΙΓΡΑΦΗ

2.13inch Touch E-Paper E-Ink capacitive touch e-Paper display For Raspberry Pi Zero, 250×122 Pixels, with ABS Protection Case. With partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect. Specialized for Raspberry Pi Zero / Zero W.

Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Features At A Glance

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels
  • Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • Comes with development resources and manual (examples for Raspberry Pi)

Fine Design, Precise Cut-Out

Highly Aligned Connectors, Rounded Corner Design, Slant Sides For Easily Standing

Heat Dissipation Holes On The Back

Combined With Thermal Tape, Effective Heat Dissipation

Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Zero / Zero W

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

Εγγύηση:
Ως εξάρτημα, δεν καλύπτεται
Κατασκευαστής
:
WAVESHARE
Part Number:
2.13inch Touch e-Paper HAT (with case)
Μικτό Βάρος:
0.022kg
Τύπος:
e-Paper
Μέγεθος Οθόνης:
2.13"
Ανάλυση:
250x122
Χρώματα Οθόνης:
Μαύρο & Λευκό
Οθόνη Aφής:
Capacitive
Συμβατό Raspberry:
  • Zero
  • Zero W

ΕΠΙΠΛΕΟΝ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

  • Operating Voltage: 3.3V
  • Grey Scale: 2
  • Interface: 3-wire SPI, 4-wire SPI
  • Partial Refresh Time: 0.3s
  • Outline Dimensions: 69.15 x38.90mm
  • Full Refresh Time: 2s
  • Display Size: 48.55 x23.70mm
  • Refresh Power: 26.4mW(typ.)
  • Dot Pitch: 0.194 x0.194mm
  • Standby Current: <0.01uA (almost none)
  • Resolution: 250×122 pixels
  • Viewing Angle: >170°
  • Display Color: black, white
  • Touch Point: 5 (max)
  • Weight: 0.043 kg

Outline Dimensions

Pinout Definition

In the Box

  1. 2.13inch Touch e-Paper HAT x1
  2. ABS case x1
  3. Screwdriver x1
  4. Thermal tape x1
  5. rubber feet 4PCS x1
  6. Screws x2

ΔΥΝΑΤΟΤΗΤΕΣ

How To Install

ΑΡΧΕΙΑ