Από 04/01 το φυσικό μας κατάστημα (Κέντρο) θα εξυπηρετεί μόνο επαγγελματίες και από την Reception μας (Άγιο Δημήτριο) θα μπορούν να παραλάβουν την παραγγελία τους μόνο επαγγελματίες.
 
Οι ηλεκτρονικές παραγγελίες θα αποστέλλονται κανονικά αλλά με καθυστερήσεις στις παραδόσεις λόγω αυξημένου φόρτου εργασίας στις εταιρίες courier.
FREE SHIPPING for orders over 85.00

PIR Sensor Module HC-SR501

by OEM

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away.

19-00012039
Gross Weight: 0.01kg
Company: OEM
Made in: China
In Stock
Ships in 24 Hours
Low stock in store
2.80
Without VAT 2.26
+
Our quantity discounts:
Quantity 10+ 100+ 1000+
Price 2.24 1.96 1.68
WISHLIST COMPARE

DESCRIPTION

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensitivity.

Runs on 5V power (if you need to run it off of 3V you can do that by bypassing the regulator, but that means doing a bit of soldering). Digital signal output is 3.3V high/low. Sensing range is about 7 meters (120 degree cone).

SPECIFICATIONS

Sensor Type:
  • Motion
Typical Input Voltage:
  • 5VDC
Oparating Current:
60mA
Interface:
  • Digital
Communication Protocol:
  • Without

SPECIFICATIONS

  • Color: White + Green
  • Infrared sensor with control circuit board
  • The sensitivity and holding time can be adjusted
  • Working Voltage Range: DC 4.5V- 20V
  • Current drain: <60uA
  • Voltage Output: High/Low level signal: 3.3V TTL output
  • Detection distance: 3--7M(can be adjusted)
  • Detection range: <140°
  • Delay time: 5-200S(can be adjusted, default 5s +-3%)
  • 3.2 x 2.4 x 1.8cm (approx)